Your cart is empty
775 AM frame + Touring Package: integrated front/rear fenders, rear cargo rack, integrated lighting. Front 160mm, rear 150mm travel. Estimated range 18–44 mi. Coming Summer 2026 — pre-order at RevRides ($4,890). Trail + daily commute dual-use positioning. Drive unit: CYC Photon Gen 1 (1.2 kW peak / 110 Nm), Magura MT5, Tranz-X 30.9 dropper, 10-speed e10, mullet 29/27.5.
The 775 AM Touring is built for riders who commute during the week and hit trails on weekends. Mechanically it follows the 775 AM: a CYC Photon Gen 1 mid-drive, a quick-connect CYC A-Series battery in 520 Wh or 780 Wh, a fork with 160 mm of travel on a Boost 15x110 axle, and a 29 inch front, 27.5 inch rear mullet wheel layout.
That shared spec makes ordering simple. Brakes are Magura MT5 four-piston calipers with Magura MDR-C rotors, 220 mm front and 203 mm rear. The drivetrain is 10-speed, with a KMC e10Sport EPT chain and a Microshift CS-EH104 11-48T cassette. Tires are a Maxxis Assegai DD MaxxGrip 2.5 front and a Maxxis DHR II DD MaxxTerra 2.5 rear, with Maxxis Welter Weight 2.5 inch tubes inside.
Mixed use changes how those parts wear. Wet streets and road grit are hard on an exposed 10-speed chain and cassette and debris on the road shoulder is tough on tires. Keep the chain clean and lubed, check pad thickness often, and inspect tires for cuts. Each part page lists the 775 models it has been matched to. WiredWhips carries parts for a broad range of electric bike and e-moto makers.
| Battery | CYC A-Series quick connect, 520 Wh or 780 Wh[1] |
|---|---|
| Brakes | Magura MT5, 4-piston[1] |
| Rotors | Magura MDR-C, 220 mm front / 203 mm rear[1] |
| Wheel size | 29 in front / 27.5 in rear (mullet)[1] |
| Tires | Maxxis Assegai DD MaxxGrip 2.5 front / Maxxis DHR II DD MaxxTerra 2.5 rear[1] |
| Tubes | Maxxis Welter Weight 2.5 in[1] |
| Chain | KMC e10Sport EPT, 10-speed[1] |
| Cassette | Microshift CS-EH104 11-48T[1] |
| Fork travel | 160 mm, Boost 15x110[1] |
| Drive unit | CYC Photon Gen 1[1] |
| Touring package | Integrated front/rear fenders, rear cargo rack, integrated lighting[1] |
Mechanical parts follow the 775 AM: Magura MT5 brakes with MDR-C rotors, a 10-speed KMC e10Sport chain on a Microshift 11-48T cassette, mullet wheels and the A-Series battery in 520 Wh or 780 Wh. Touring fenders, rack and lighting are not yet listed as separate parts.
Mechanically, yes. The Touring is the AM frame with fenders, a rack and integrated lights added, so the chain, brakes, rotors, wheels, tires and battery listed for the AM also apply to the Touring.
For mixed road and trail use, a comfort compound such as the Magura 9.C trades a little peak bite for smoother modulation and longer pad life. If you also ride steep descents often, compare it with a performance or sport compound.
Wipe the chain after wet rides, apply a wet lube, and pick a chain with a corrosion-resistant coating. The stock chain is a KMC e10Sport EPT; replace it once a chain checker shows wear.
Not yet. Those Touring package parts are not in our catalog at the moment. The mechanical parts shared with the 775 AM are listed on this page.
Last reviewed 2026-10-19 by Mr Content, WiredWhips · reviewed by WiredWhips SEO desk

Tubolito S-Tubo MTB Tube - 27.5/29 × 1.8-2.5", 42mm Presta
$46.99

Stan's Original Tubeless Rim Tape - 27mm × 10m
$21.99

WTB TCS Standard Tubeless Valves - 34mm Presta (2-pack)
$22.99

Stan's Race Day Tubeless Sealant - 1000ml
$57.99

Stan's Original Dart Tubeless Repair Tool
$31.99

Stan's Dart Tubeless Repair Refills - 6-pack
$25.99
97 parts across 9 categories
1 part
24 parts

Brake Pads
Genuine Magura 8.P Performance pads for MT5/MT7 4-piston calipers. Bonnell 775 MX, 775 AM, and 775 AM Touring all ship with Magura MT5 4-piston brakes. MDP 8 shape (4 individual pads per caliper). Organic performance compound with strong bite for longer braking. One set covers one caliper - order two sets for front + rear. Replaces incorrect MDP 13 (Gustav/Clara only).
$64.99
+ shipping

Brake Pads
Magura 8.S Sport compound pads for MT5/MT7 4-piston calipers - e-bike oriented for durability and short bed-in. Fits Bonnell 775 MX / AM / AM Touring Magura MT5 brakes. One set per caliper; order two for front and rear.
$46.99
+ shipping

Brake Rotor / Disc
Magura MDR-C 220mm 6-bolt front rotor, e-bike optimized. Matches stock 220mm front rotor size on Bonnell 775 AM / AM Touring (MDR-C) and is a solid replacement size for 775 MX front (stock MDR-P 220mm). Compatible with Magura MT5 4-piston calipers.
$68.99
+ shipping

Brake Fluid
OEM-spec mineral oil for Magura MT5 brakes on the Bonnell 775 platform. Do not use DOT fluid in Magura systems.
$20.99
+ shipping

Brake Pads
Race compound Magura 8-series pads for MT5 4-piston calipers. Aggressive bite for downhill/enduro; expect faster wear than 8.S/8.P.
$83.99
+ shipping

Brake Rotor / Disc
2.0mm Magura Storm HC rotor sized for the 775 MX rear (203mm stock). Includes rotor bolts. Compatible with Magura MT5 pads.
$52.99
+ shipping

Brake Pads
9-series Performance compound pads for Magura MT5/MT7 on Bonnell 775. One-piece backplate pair for a single caliper - order two pairs for full bike. Strong bite alternative to 8-series pads already listed.
$47.99
+ shipping

Brake Pads
9-series Comfort compound for MT5/MT7 - more modulation and longer wear than Performance, less peak power. Good daily-trail choice for 775 AM Touring and all-day MX sessions.
$40.99
+ shipping

Brake Pads
E-bike optimized 9.S Sport pads for Magura MT5/MT7. Short bed-in and durable compound suited to Bonnell 775 motor-assisted descending.
$39.99
+ shipping

Brake Levers
HC aluminum 1-finger lever blade upgrade for stock Magura MT5 masters on Bonnell 775. Improves lever feel/reach for smaller hands and aggressive one-finger braking.
$81.99
+ shipping

Brake Rotor / Disc
Magura MDR-S 203mm rear rotor for Bonnell 775 MX. Stock is MDR-P floating 203mm rear - MDR-S is the standard (non-floating) alternative, same size, 6-bolt mount, compatible with MT5 calipers.
$61.99
+ shipping

Brake Rotor / Disc
Magura MDR-C 220mm rotor, eBike optimized - reinforced for the higher thermal loads from e-bike braking (75 lb bike + rider + CYC motor regen). Compatible with Magura MT5 and MT7 calipers as used on the 775 MX. Upgrade the front rotor from the stock size for more stopping power on steep descents.
$68.99
+ shipping

Brake Assembly (Complete)
Stock-style Magura MT5 lever+caliper for Bonnell 775 MX (moto-flip levers). Rotor sold separately - use 2.0mm Magura rotors (MDR-P/MDR-C/Storm HC).
$216.99
+ shipping

Brake Assembly (Complete)
Gravity-oriented Magura MT7 Pro upgrade from stock MT5 on Bonnell 775 MX/AM. Flip-flop lever, MagnetiXchange pads, Royal Blood mineral oil, designed for 2.0 mm Magura rotors (MDR-C 220 F / 203 R stock sizes). Rotor sold separately.
$361.99
+ shipping

Brake Hardware Kit
Replacement BAT adjuster plug kit for Magura MT7-class levers. Relevant when upgrading Bonnell 775 from stock MT5 to MT7 Pro or servicing MT7 levers. Not required for stock MT5 master cylinders.
$18.99
+ shipping

Caliper Adapter
Magura QM42 caliper adapter to run 203mm rotors on 160mm post-mount frames. Fits Bonnell 775 Magura MT5/MT7 setups when upsizing rotors.
$19.99
+ shipping

Caliper Adapter
Magura QM45 post-mount adapter for 180-220mm front or 140-180mm rear rotor sizing on Bonnell 775 Magura brakes.
$25.99
+ shipping

Brake Hardware Kit
Replacement Magura EBT reservoir bleed screws with O-rings for MT5/MT7 service on Bonnell 775.
$18.99
+ shipping

Caliper Adapter
Post-mount adapter to run Magura 220mm rotors on 203mm PM mounts - useful front upgrade path with Magura MT5/MT7 on Bonnell 775 platforms. Includes mounting hardware.
$23.99
+ shipping

Brake Hardware Kit
Service olives for Magura MT hose jobs (shorten/re-route hose on MT5/MT7). Pair with hose inserts and sleeve nuts; always re-bleed with Royal Blood after hose work.
$31.99
+ shipping

Brake Hardware Kit
Magura high-pressure hose barb inserts used with olives when cutting/rebuilding MT brake hoses on Bonnell Magura systems.
$42.99
+ shipping

Brake Hardware Kit
Right-side Shiftmix 4 lets a Shimano I-Spec EV shifter share the Magura MT master clamp - cleaner cockpit on 775 AM 10-speed builds.
$42.99
+ shipping

Brake Line / Hose
Magura OEM brake hose for MT5 hydraulic brakes on Bonnell 775 MX. 3000mm (trim to length). Hose only - no fittings included. For full brake line replacement.
$49.99
+ shipping
Brake Hardware Kit
Cosmetic/protective colored cover kit for Magura 4-piston calipers (MT5/MT7) on Bonnell 775.
$56.99
+ shipping
18 parts

Grips
Wolf Tooth Fat Paw lock-on grips - oversized 32.5mm diameter absorbs vibration and gives a secure, comfortable hold on the 775 MX's 35mm rise bars. Single-clamp lock-on design stays put even in rough DH conditions. Compatible with standard 22.2mm bar ends and 31.8mm clamp sections.
$44.99
+ shipping

Pedals
Crankbrothers Stamp 1 Gen 2 large flat pedals - one of the most popular MTB flat pedals at an accessible price. 9/16" threaded axle fits the CYC X1 Pro crank arms. Large size (105 × 105mm) provides a stable platform for DH riding. Composite body with 10 pins per side. Upgrade from stock pedals for better grip.
$81.99
+ shipping

Grips
ODI Ruffian Half-Waffle MX Grips for Bonnell (775 MX, 775 AM +1 more) for Bonnell (775 MX, 775 AM, 775 AM Touring). Measure bar diameter and lock-on vs glue-on before swapping.
$19.99
+ shipping

Grip Glue
Tusk Handlebar Grip Glue for Bonnell (775 MX, 775 AM +1 more) for Bonnell (775 MX, 775 AM, 775 AM Touring). Measure bar diameter and lock-on vs glue-on before swapping.
$2.99
+ shipping

Grips
Universal lock-on half-waffle grips for 7/8" bars.
$29.99
+ shipping

Grips
Renthal dual-compound MX grips. Glue-on.
$23.99
+ shipping

Pedals
Affordable composite flat pedals, 9/16" axle - direct swap for Bonnell flat pedals on 775 cranks. Choose Large platform for enduro shoes.
$73.99
+ shipping

Pedals
Thin aluminum platform pedals with 10 pins per side. Strong upgrade over stock composite flats on the 775 platform.
$159.99
+ shipping

Grips
Half-waffle lock-on grips popular for enduro/DH. 31.8/standard MTB bars on 775; left grip pairs with full-twist throttle setups.
$35.99
+ shipping

Pedals
Affordable composite platform pedal upgrade (9/16") for Bonnell 775. Lighter/cheaper alternative to OneUp aluminum already listed.
$62.99
+ shipping

Dropper Post
Premium 3mm dropper post cable and housing set from Bike Yoke. Compatible with the Tranz-X dropper post on the Bonnell 775 MX. Replace the inner cable and housing together when dropper action becomes sluggish or the cable frays. Pre-cut set includes enough length for most MTB frames.
$18.99
+ shipping

Handlebars
Aluminum FatBar near stock Bonnell 780mm × 50mm rise 31.8 cockpit (this SKU is 800×30 rise). Cut width to taste; verify stem clamp 31.8.
$133.99
+ shipping

Stem
Short stiff 31.8 stem upgrade near Bonnell stock 45mm forged stem length. Matches stock 31.8 Bonnell bars and the catalog Renthal FatBar 31.8. Not a 35 mm clamp stem.
$185.99
+ shipping

Dropper Post
30.9 mm internal dropper replacement matching Bonnell 775 AM Tranz-X seat tube spec. Choose travel by frame size (S/M ~150-175, L/XL ~175-200). Keep the Tranz-X J22.2 thumb-throttle-compatible remote or cable-actuated remote of choice. Not sized for MX without confirming seat tube.
$197.99
+ shipping

Dropper Post
Cable dropper remote matching PNW Range / Tranz-X-style internals on 775 AM 30.9 posts. Good spare or upgrade when stock remote wears.
$61.99
+ shipping

Dropper Post
Replacement cable/housing kit for PNW/Tranz-X style cable-actuated droppers on 775 AM. Service sticky or frayed dropper cables without replacing the full post.
$19.99
+ shipping

Grips
Odi Ruffian No-Waffle MX Grips for Bonnell (775 MX, 775 AM +1 more) for Bonnell (775 MX, 775 AM, 775 AM Touring). Measure bar diameter and lock-on vs glue-on before swapping.
$19.99
+ shipping

Grips
Odi Rogue Single-Ply MX Grips for Bonnell (775 MX, 775 AM +1 more) for Bonnell (775 MX, 775 AM, 775 AM Touring). Measure bar diameter and lock-on vs glue-on before swapping.
$16.99
+ shipping
2 parts

Chain
KMC e10 EPT anti-rust e-bike chain for Bonnell 775 AM and AM Touring 10-speed drivetrains (Tektro RD-M5100 + Microshift 11-48T cassette; stock is KMC e10Sport EPT). Not for 775 MX single-speed KMC e1 setup.
$81.99
+ shipping

Front Sprocket
Complete Photon Gen 1 chainring set matching Bonnell 775 AM stock CYC steel narrow-wide 34T with aluminum bash/cover. Gen 1 only - not Photon Gen 2 and not X1 Pro MX chainrings.
$118.99
+ shipping
16 parts

Battery
Stock-capacity CYC A-Series quick-connect battery for Bonnell 775 AM / AM Touring (Photon Gen 1, 52V). Removable pack for range swaps and non-powered trail mode. Not compatible with 775 MX A65 pack.
$595.99
+ shipping
Currently unavailable

Throttle
Service/replacement thumb throttle compatible with CYC Photon systems used on the 775 AM. Stock AM uses a thumb throttle (Class 2 enabled; disabled in app Class 3 mode). Pair with Tranz-X J22.2 dropper lever spacing on the bar.
$24.99
+ shipping

Throttle
Full-twist throttle alternative to stock/universal thumb throttles on CYC Photon Gen 1 775 AM. Confirm plug compatibility with existing peripheral harness.
$35.99
+ shipping

Battery
Higher-capacity A-Series quick-connect upgrade battery for Bonnell 775 AM / AM Touring. Same mount interface as the stock 520Wh pack for tool-free swaps. Not for 775 MX.
$778.99
+ shipping

Display / Dashboard
Stock-style CYC Intuition integrated smart display used on the Bonnell 775 AM Photon platform. Color round UI with Ride Control app integration. Confirm harness generation on install; not an X1 Pro MX display.
$177.99
+ shipping

Display / Dashboard
Compact bar-mount SW102 OLED with CYC firmware for Photon Gen 1 / X6P-class controllers used on 775 AM. Compact alternative to Intuition. Not for Photon Gen 2 SW102T-only setups and not the 775 MX X1 Pro default path unless controller matches.
$94.99
+ shipping

Display / Dashboard
Larger color TFT display option for CYC Photon Gen 1 / X6P systems on the 775 AM. 36-52V nominal matches the AM pack. Verify mount clearance with Intuition-style cockpit before swapping.
$123.99
+ shipping

Sensors
Replacement magnetic speed sensor for CYC X-series / Photon controllers. Matches the Bluetooth speed-sensor role on the 775 AM. Confirm magnet placement on the mullet rear wheel after install.
$35.99
+ shipping

Wiring Harness
Shared M8 3-pin extension for throttle, gear sensor, or e-brake leads on CYC Photon / 1T4 harness bikes including 775 AM. Useful when rerouting bars or replacing a short stock lead.
$19.99
+ shipping

Charger
52V 4A smart charger matching Bonnell 775 AM CYC A-Series battery charge rate (stock CYC 4A class). Selectable 80/90/100% charge for pack longevity. Confirm adapter for the A-Series charge port before install.
$100.99
+ shipping

Charger
Lower-amp 52V charger for overnight/travel charging of Bonnell 775 AM CYC A-Series packs. Gentler on cells than 4A; pair with correct charge-port adapter.
$69.99
+ shipping

Lighting
Compact USB taillight for 775 AM Touring / night rides. Strap mount works on seatpost, rack stay, or bag. Daytime flash modes for street visibility.
$37.99
+ shipping

Lighting
800-lumen smart headlight upgrade for 775 AM Touring street/commute use. Bar mount; pairs with Garmin edge/computers when available. Not a hard-wired e-system light.
$145.99
+ shipping

Wiring Harness
1→4 peripheral harness for CYC Photon Gen 1 / X6P controllers (Bonnell 775 AM). Expands accessory ports for throttle, brake sensors, display branches. Not for Photon Gen 2.
$28.99
+ shipping

Sensors
Brake inhibit/cutoff sensors for CYC mid-drive peripheral ports. Cuts motor assist when lever is pulled - recommended safety accessory on throttle-equipped 775 AM builds.
$25.99
+ shipping

Lighting
Hard-wired style e-bike headlight kit with XT90 adapter for CYC battery systems - strong touring/commute option for 775 AM Touring when integrating lights into the e-system power.
$90.99
+ shipping
1 part
5 parts

Fork Oil
Stan's ForkBoost wax-based stanchion spray. Apply to the SR Suntour Rux 38 stanchions before each ride to repel dirt and water - dramatically reduces stanchion wear and keeps the fork action buttery smooth. Spray on clean stanchions, wipe to a thin coat.
$18.99
+ shipping

Fork Oil
Stan's 5WT bio-based suspension oil for the 775 MX's SR Suntour Rux 38 RC+ fork. 5WT is the recommended lower leg bath oil viscosity for Suntour forks. Service the lower legs every 50 hours of riding - it takes about 10ml per leg. 1L bottle lasts many service intervals.
$38.99
+ shipping

Rear Shock
Neoprene shock cover to shed mud/debris.
$23.99
+ shipping

Fork Oil
5WT fork oil for cartridge/USD forks. Confirm viscosity spec.
$24.99
+ shipping

Headset
Common tapered ZS44/ZS56 replacement headset for modern e-MTB frames. Confirm Bonnell 775 AM head-tube SHIS before install; not assumed for MX without measurement.
$113.99
+ shipping
15 parts

Chain Lubricant
Stan's bio-based wet chain lube for all-weather and muddy riding. The CYC X1 Pro chain drive is exposed to trail debris - a wet lube keeps the chain running smoothly and reduces wear in wet or dusty conditions. Apply after every wash or wet ride.
$18.99
+ shipping

Chain Lubricant
Motul MC CARE C3 Off-Road Chain Lube for Bonnell (775 MX, 775 AM +1 more) for Bonnell (775 MX, 775 AM, 775 AM Touring). Match photos, connectors, and mounting points to your bike before ordering.
$16.99
+ shipping

Chain Lubricant
Maxima Chain Wax for Bonnell (775 MX, 775 AM +1 more) for Bonnell (775 MX, 775 AM, 775 AM Touring). Maxima. Match photos, connectors, and mounting points to your bike before ordering.
$22.99
+ shipping

Chain Cleaner
Maxima Clean-Up Chain Cleaner - Bonnell for Bonnell (775 MX, 775 AM, 775 AM Touring). Match photos, connectors, and mounting points to your bike before ordering.
$18.99
+ shipping

Specialty Tools
Soft tow rope for recovering an e-moto. Universal.
$24.99
+ shipping

Specialty Tools
Tusk 15" Curved Tire Iron - Bonnell 775 for Bonnell (775 MX, 775 AM, 775 AM Touring). Match photos, connectors, and mounting points to your bike before ordering.
$16.99
+ shipping

Specialty Tools
Soft-loop tie-downs for transporting the bike.
$75.99
+ shipping

Grease
Waterproof grease for bearings, pivots, and splines.
$21.99
+ shipping

Specialty Tools
Cable lubrication tool for throttle cables.
$21.99
+ shipping

Specialty Tools
Consumer bleed kit for Magura MT-series brakes. Use only with Magura Royal Blood mineral oil.
$45.99
+ shipping

Specialty Tools
M6 Magura bleed/fill adapters for caliper service. Complements mini bleed kit, syringe, and Royal Blood already in catalog.
$25.99
+ shipping

Specialty Tools
Magura MT series bleed nozzle set. Required for bleeding Magura MT5 hydraulic brakes on Bonnell 775 MX. Use with syringe and Royal Blood fluid.
$19.99
+ shipping

Specialty Tools
Magura bleed syringe for bleeding MT5 brakes on Bonnell 775 MX. 24ml, Luer Lock fitting. Use with Magura Royal Blood mineral oil and MT bleed nozzle set.
$20.99
+ shipping

Specialty Tools
Required service tool to loosen the Photon chainring retaining cover when swapping the 34T/38T set or accessing the torque sensor on 775 AM.
$23.99
+ shipping

Specialty Tools
Factory send-in service for PNW droppers (seals/bushings/cables). Relevant when 775 AM runs PNW Range 30.9 as stock-match replacement. Does not include full cartridge replacement unless specified by PNW.
$61.99
+ shipping
15 parts

Front Tire
Maxxis Assegai 29" × 2.5" front tire for Bonnell 775 MX. Stock spec uses MaxxGrip DH casing - this MaxxTerra EXO variant is a durable everyday alternative. Same size (29" front per mullet setup). Tubeless ready.
$109.99
+ shipping

Rear Tire
Maxxis Assegai 27.5" × 2.5" rear tire for Bonnell 775 MX (mullet setup - 29" front / 27.5" rear). MaxxTerra EXO variant; stock is MaxxGrip DH casing. Tubeless ready.
$109.99
+ shipping

Front Tube
Ultralight TPU inner tube that fits both 27.5" and 29" wheels - covers the 775 MX's mullet setup (29" front and 27.5" rear) with a single tube SKU. One-third the weight of a standard butyl tube. Great emergency backup for trail rides. 42mm Presta valve clears all standard rim depths.
$46.99
+ shipping

Tubeless Accessories
Stan's tubeless rim tape in 27mm width - fits both the 29" front and 27.5" rear rims on the 775 MX. Required for tubeless conversion or re-taping after a rim swap. 10m roll does both wheels with material to spare.
$21.99
+ shipping

Tubeless Accessories
WTB tubeless Presta valves, 34mm length - a 2-pack covers both wheels. Required for tubeless setup. Replace when the valve core seizes or the rubber base tears from repeated sealant injections.
$22.99
+ shipping

Tubeless Accessories
Stan's Race Day sealant - the go-to for big-volume DH tires. The 775 MX runs 2.5" tires front and rear, which need more sealant than a cross-country setup. 1000ml fills both tires with room to refill after a mid-trail puncture repair.
$57.99
+ shipping

Tubeless Accessories
Stan's Dart injection-style tubeless repair tool. Fires a plug directly into the sidewall puncture from outside the tire - no need to remove the wheel or deflate. Essential trail carry for the 775 MX's terrain. Pair with the Dart Refill 6-pack.
$31.99
+ shipping

Tubeless Accessories
Replacement Dart plug refills for the Stan's Original Dart Repair Tool - 6-pack. One plug per puncture; buy a pack so you never run out mid-session. Compatible with the Stan's Dart tool only.
$25.99
+ shipping

Front Tire
Maxxis Minion DHF - the gold standard front DH tire - in 29" for the 775 MX. 3CG compound balances cornering grip with rolling efficiency. DH Wide Trail casing handles the 775 MX's 75 lb weight and CYC motor torque. E-50 rated for e-bike use up to 50 km/h. Tubeless-ready folding bead.
$130.99
+ shipping

Rear Tire
Maxxis Minion DHR II in 27.5" for the 775 MX rear wheel. 3C MaxxGrip compound maximizes braking traction - critical when the CYC motor is pushing the bike hard downhill. DH casing withstands impacts on the rear. Popular upgrade from the stock Assegai for more aggressive DH riding.
$130.99
+ shipping

Rear Tube
Butyl rear tube for Bonnell 775 mullet setups (27.5" × 2.5" rear Assegai / DHR II). 48mm Presta valve. Durable everyday spare for trail flats when not running tubeless.
$21.99
+ shipping

Front Tube
Butyl front tube for Bonnell 775 mullet 29" × 2.5" front tires. 48mm Presta valve. Keep as a trail spare alongside the 27.5 rear tube.
$19.99
+ shipping

Tubeless Accessories
Factory-style Tannus Armour foam insert for the 775 MX rear 27.5×2.5 wheel. Sits between tire and tube for puncture/rim protection. Pair with a slightly smaller tube. Fitment confirmed for 775 AM mullet rear 27.5×2.5 as well.
$72.99
+ shipping

Tubeless Accessories
Tannus Armour insert for 29×2.5 front tire on mullet 775 setups. Adds puncture resistance and sidewall support.
$72.99
+ shipping
Tubeless Accessories
Anodized valve stem caps for Presta or Schrader tubeless/tube valves on 775 mullet wheels.
$6.99
+ shipping