Your cart is empty
2025 flagship. Specs not fully confirmed — add VERIFY_FITMENT flag to all Dragon-specific parts.
We stock 31 OEM and 114 aftermarket parts for the Talaria Dragon (28 kW, 70 mph top speed, 5148 Wh battery). Top categories: COCKPIT, BRAKES, DRIVETRAIN, WHEELS & TIRES. $12 flat US shipping on every order.

DID 428 NZ Chain — Non-Ring Standard (Gold or Natural)
$127.99

DID 428 VX X-Ring Chain — Sealed Premium (Gold or Natural)
$143.99
Sold Out

DID 428 NZ Clip Connecting Link — Non-Ring Type
$6.99

DID 428 VX Press-Fit Connecting Link — X-Ring Type
$10.99

Gearbox Oil 80W-90 — Talaria Sting (All Sting Models with Gearbox)
$19.99

EK 420SH Chain & Sprocket Bundle — Talaria Dragon
$123.99
145 parts across 15 categories
15 parts

Skid Plate
Protects motor, battery bottom, and frame underside from rocks and roots. High-demand item for trail riders. Aluminum version preferred over HDPE for durability. Check model year - MX3 vs MX4 bash guard fitment may differ.
$86.99
+ shipping

Front Fender
Sting front fender - verify X3 separately (different wheel size).
$38.99
+ shipping

Rear Fender
OEM rear fender for the Talaria Sting MX3, MX4, and MX4 Expert. Direct OEM replacement with correct mounting points and profile. The rear fender is the most common body panel cracked in tip-overs.
$18.99
+ shipping

Side Panels / Plastics
OEM side panels for the Talaria Sting MX3 and MX4. Most frequently cracked in hard tip-overs - worth keeping a spare set if you ride rocky terrain. MX4 Expert and MX5 Pro use different panel profiles.
$18.99
+ shipping

Frame Guards
Adhesive frame protection kit. Guards against boot rub and rock chips on frame tubes. Very popular accessory - most riders add this along with a skid plate.
$44.99
+ shipping

Front Fender
Type 1 front fender listed for Talaria/Sur-Ron/Segway front ends.
$51.99
+ shipping

Skid Plate
7075 billet skid with replaceable bash plate for Talaria Sting MX3/MX4/MX5. Will not fit EBMX XTA Core motor without mods.
$235.99
+ shipping

Subframe
OEM rear subframe for the Talaria Sting MX3, MX4, and MX4 Expert. The aluminum subframe rear tabs are vulnerable in hard tip-overs - inspect for cracks at the mounting points regularly. Direct OEM fit, no modification required.
$18.99
+ shipping

Accessory
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$24.99
+ shipping

Seat
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$100.99
+ shipping

Fender
Auto-sourced 2026-07-07 from ECR collection for xxx.
$54.99
+ shipping

Accessories
Auto-sourced 2026-07-07 from ECR collection for xxx.
$401.99
+ shipping

Motor Cover
Billet motor cover for Talaria MX3/MX4/MX5. Confirm bolt pattern if Dragon uses a different case cover.
$100.99
+ shipping

Kickstand
Adjustable 6061 aluminum kickstand for light e-motos. Choose standard fitment variant (not Ultra Bee-specific).
$62.99
+ shipping

Kickstand Spring
OEM-style kickstand spring hardware kit for light e-moto side stands.
$23.99
+ shipping
20 parts

Brake Fluid
ALL Talaria models use mineral oil - NEVER use DOT fluid. DOT will destroy brake seals immediately.
$11.99
+ shipping

Brake Levers
Specifically engineered for Talaria Sting MX3 master cylinder. NOT compatible with MX4 (different master cylinder design). For MX4 see Warp 9 or TOFR levers.
$62.99
+ shipping

Brake Fluid
CRITICAL: Talaria Sting uses Tektro hydraulic brakes requiring MINERAL OIL only. Using DOT fluid destroys the seals. Confirmed compatible with MX3, MX4, X3.
$12.99
+ shipping

Brake Rotor / Disc
Warp 9 220mm floating front rotor upgrade commonly used on Talaria platforms including Komodo/Dragon. Verify hub/bolt pattern for your exact hub before install.
$86.99
+ shipping

Brake Rotor / Disc
Warp 9 floating rear rotor for OEM Talaria hubs. Strong upgrade over thin stamped stock rotors.
$86.99
+ shipping

Brake Rotor / Disc
Warp 9 fixed 220mm front rotor. Verify bolt pattern/hub for Dragon ABS setups before install.
$86.99
+ shipping

Brake Pads
Galfer pads for Talaria-family calipers. Confirm Dragon caliper compound (front/rear) at checkout.
$42.99
+ shipping

Brake Levers
ASV F3-E levers marketed for Talaria/Sur-Ron master cylinders.
$185.99
+ shipping
Brake Pads
Galfer e-bike compound pads for Talaria calipers. Sold per wheel; confirm compound for your rotor.
$42.99
+ shipping

Brake Pads
Sintered OEM-style pads for large e-moto calipers used on Talaria MX5-class brakes (also E-Ride 3.0/SR, Altis Sigma). One set per caliper.
$30.99
+ shipping

Brake Pads
OEM pad set for Talaria MX5 large calipers. Purchase one set per caliper (front and rear separately).
$28.99
+ shipping

Brake Pads
Type 2 pad kit listed for E-Ride Pro 3.0/SR, Altis Sigma, Talaria MX5 and similar large-caliper e-motos.
$24.99
+ shipping

Brake Levers
OEM replacement brake levers for Talaria Sting MX5 master cylinders.
$25.99
+ shipping

Brake Levers
OEM front brake lever for the Talaria Sting MX3 and MX4. Tektro Auriga hydraulic caliper - direct OEM replacement. If only the lever tip broke, replace the lever; if the piston or reservoir is damaged, replace the master cylinder assembly.
$25.99
+ shipping

Brake Assembly (Complete)
Full Formula EB9 set. Choose the Talaria MX5/Altis Sigma mount option on the product page. Confirm caliper spacing on Dragon/Komodo before ordering.
$934.99
+ shipping

Brake Levers
Forged folding levers for Talaria / Altis / E-Ride Pro brake perches. Preserves OEM brake-switch function.
$57.99
+ shipping

Brake Assembly (Complete)
Formula E-Moto brakes pairing motorcycle master cylinder feel with 4-piston Cura-based calipers. Confirm adapter/rotor size for Dragon.
$340.99
+ shipping

Brake Caliper
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$340.99
+ shipping

Brake Rotor / Disc
Auto-sourced 2026-07-07 from ECR collection for xxx.
$86.99
+ shipping

Brake Rotor / Disc
Auto-sourced 2026-07-07 from ECR collection for xxx.
$39.99
+ shipping
6 parts

Brake Assemblies
TRP DH-R EVO full brake set (front and rear hydraulic). Top-tier upgrade for Surron and Talaria Sting. Komodo uses a different caliper mount geometry - confirm fitment before ordering.
$362.99
+ shipping

Brake Rotors
Warp9 220mm floating rotor for Talaria Sting MX3/MX4/Expert/Komodo. Lighter than OEM with improved heat dissipation.
$86.99
+ shipping

Brake Rotors
OEM 220mm front brake rotor for Talaria Sting. Fits MX3, MX4, MX5, and most variants. Confirm Dragon fitment before ordering.
$42.99
+ shipping

Brake Rotors
OEM 220mm rear brake rotor for Talaria Sting MX3, MX4, and MX4 Expert. Verify fitment on Dragon before ordering.
$42.99
+ shipping

Brake Levers
OEM brake lever (front or rear). Aluminum alloy. on Dragon (may use different lever spec).
$14.99
+ shipping

Brake Hardware
Warp9 CNC rear rotor guard for Talaria Sting platform. Shields rotor from trail debris and rock strikes.
$112.99
+ shipping
26 parts

Grips
OEM slip-on grip set for all Talaria models. The stock grips tend to rotate under aggressive riding or in wet conditions. If you experience grip migration, upgrade to lock-on grips - ODI Emig and Rogue Air both fit the 22.2mm Talaria bar.
$20.99
+ shipping

Grips
Lock-on grips for standard 22mm dirt bike handlebars. Fits all Talaria Sting models. Multiple color options. Lock-on design eliminates grip rotation - preferred for MX/off-road use.
$31.99
+ shipping

Foot Pegs
Wide-platform aftermarket footpegs. Bigger standing platform than OEM. Pro Taper is a top choice for MX riders. Verify mounting tab compatibility - check for Talaria-specific listing or universal fit with correct mounting dimensions.
$69.99
+ shipping

Handlebars
Warp 9 is a Talaria specialist brand. Confirmed compatible with MX3 and MX4. Requires Warp 9 Direct Bar Mount Stem or similar 31.8mm adapter.
$109.99
+ shipping

Grips
Universal talaria owner maintenance item.
$37.99
+ shipping

Foot Pegs
Warp9 wide pegs; confirm Dragon peg-mount bolt pattern matches Light Bee/Sting class before install.
$135.99
+ shipping

Grips
ODI Ruffian half-waffle grips, 22mm bars.
$17.99
+ shipping

Handlebars
Warp9 3" rise bar common on Talaria cockpits.
$109.99
+ shipping

Stem
Warp9 stem lock for Talaria steering towers.
$54.99
+ shipping

Handguards
Warp9 e-moto handguards.
$56.99
+ shipping

Foot Pegs
CNC billet Grappler pegs with raised center cleats. Tagged for Talaria Sting, XXX, and Komodo platforms.
$113.99
+ shipping

Foot Pegs
7075-T6 CNC pegs listed for Talaria Sting MX3/MX4/MX5, Komodo, and XXX. Uses OEM springs/pins.
$75.99
+ shipping

Foot Pegs
Forged/CNC Elite pegs for Talaria MX3/MX4/MX5/XXX and Altis Sigma. Wider platform vs standard Warp 9 pegs.
$189.99
+ shipping

Stem
Direct-mount stem supporting MX and MTB bar standards with optional extra rise. Common Talaria/Sur-Ron cockpit upgrade.
$135.99
+ shipping

Handguards
Full wrap handguards commonly fitted to Talaria/Sur-Ron bars. Confirm clamp diameter for your bar setup.
$100.99
+ shipping

Handlebars
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$135.99
+ shipping

Grips
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$19.99
+ shipping

Grips
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$19.99
+ shipping

Grips
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$16.99
+ shipping

Foot Pegs
Auto-sourced 2026-07-07 from ECR collection for xxx.
$135.99
+ shipping

Foot Pegs
Auto-sourced 2026-07-07 from ECR collection for xxx.
$35.99
+ shipping

Foot Peg Mounts
CNC adjustable peg mounts for Talaria Sting MX3/MX4/MX5. MX4 kickstand may need minor filing.
$135.99
+ shipping

Foot Pegs
Replacement peg hardware kit for Sur-Ron, E-Ride Pro, and Talaria platforms.
$12.99
+ shipping

Stem
1-inch CNC stem riser for light e-moto forks. Hardware not included.
$25.99
+ shipping

Bar Ends
6061 aluminum bar-end plugs sold as a pair. Fits most e-moto bar IDs.
$25.99
+ shipping

Handguards
Lightweight HP2 handguard set with adjustable side positions for e-moto bars.
$42.99
+ shipping
18 parts

Chain
428 pitch non-sealed chain. OEM specification chain for Electric Motion Epure Race/Sport (DID 428 NZ Gold, 128 links, 11T front / 57T rear OEM). Talaria MX5 Pro uses 428 pitch - different from MX3/MX4 which use 420. Talaria Dragon and Komodo compatibility with 428 is probable (same platform tier as MX5 Pro) but requires . Rawrr Mantis confirmed 428 pitch. Replace chain and sprockets as a matched set.
$127.99
+ shipping

Chain
Premium upgrade over the 428 NZ. X-ring seals reduce friction and extend chain life compared to non-sealed. DID describes this as their most popular on- and off-road chain. Chain Life Index 2,700 (vs. non-ring chains around 400-600). Compatible with the same 428-pitch models as the 428 NZ - select this for riders who want longer service intervals. Talaria Dragon and Komodo require .
$143.99
+ shipping

Chain
For DID 428 NZ non-ring chain used on Sur-Ron Ultra Bee, Talaria MX5 Pro (note: MX5 Pro OEM specifies 418 pitch - verify before using 428 link), Rawrr Mantis, and Electric Motion Epure. Replace connecting link every chain swap - never reuse. Electric Motion Epure OEM chain is 428 x 128L.
$6.99
+ shipping

Chain
Required when re-joining a DID 428 VX x-ring chain. Includes x-ring seals. For Sur-Ron Ultra Bee and other 428-pitch bikes running the DID 428 VX sealed chain. Press-fit type - requires chain tool (chain breaker/press) for proper installation. Chain Life Index of 428 VX is approximately 2,700 - replace connecting link even if chain is reused.
$10.99
+ shipping

Chain
420 chain for MX3/MX4/Expert. MX5 Pro uses 418 - do not substitute.
$46.99
+ shipping

Chain
MX5 Pro only - 418 pitch. Not the same as MX3/MX4 420 chain.
$46.99
+ shipping

Grease
Talaria Sting gearbox is a key differentiator vs Sur-Ron. GritShift recommends Bel-Ray as the best option found for the Sting gearbox. Service via fill bolt on right crankcase. Replace every ~600 miles or when color darkens.
$19.99
+ shipping

Chain
EK 420 bundle used across Talaria family. Confirm Dragon pitch/sprocket carrier before install.
$123.99
+ shipping
Chain
Warp 9 rear sprocket 48T OEM size paired with EK 420 120L chain. Replace chain and sprocket together.
$127.99
+ shipping

Chain
428 X-Ring chain listed for Talaria MX5 (cut to length required). Confirm Dragon stock chain pitch before ordering 428 vs 420.
$145.99
+ shipping

Front Sprocket
Stock 13T. MX4 Expert comes with 53T rear - may run different gearing up front.
$23.99
+ shipping

Rear Sprocket
OEM 48T rear sprocket for the Talaria Sting MX3 and MX4 - stock gearing on both. The MX4 Expert ships with 53T for more low-end punch. Going to 44T adds top speed at the expense of launch acceleration.
$29.99
+ shipping

Motor Mount
MX4 Expert has improved chain guide - verify fitment before ordering MX3 guide for Expert.
$74.99
+ shipping

Front Sprocket
428 pitch for MX5 Pro / Dragon / Komodo. Do NOT order for MX3/MX4 (those use 420 pitch with a different spline). Replace chain when replacing sprocket.
$44.99
+ shipping

Gearbox
Internal gearbox unique to Talaria Sting. Change 80W90 oil every 20-30 hours of riding.
$553.99
+ shipping

Rear Sprocket
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$52.99
+ shipping

Chain
Auto-sourced 2026-06-24. Verify fitment before listing as confirmed.
$122.99
+ shipping

Chain
Auto-sourced 2026-07-07 from ECR collection for xxx.
$69.99
+ shipping
1 part
11 parts

Throttle
OEM throttle for Talaria MX4/MX5/XXX green-connector bikes. Does not fit MX3 or Komodo. Confirm Dragon connector color before ordering.
$90.99
+ shipping

Display / Dashboard
OEM color display for Talaria Sting MX5 and XXX Pro. Does not fit MX4 or standard XXX. Confirm Dragon dash connector/harness before ordering.
$223.99
+ shipping

Switches & Controls
OEM left-side combination switch for Sting MX5 platform (50391-56C00-000). Confirm pinout on Dragon before install.
$30.99
+ shipping

Lighting
Factory tail light for Talaria Sting MX4/MX5. Plug-and-play OEM replacement.
$34.99
+ shipping

Lighting
Direct plug-and-play LED headlight upgrade listed for Talaria Sting MX4 and MX5. Slim bar format with spot/flood pattern.
$25.99
+ shipping

Lighting
Higher-output Blinder light bar with dual flood/spot arrays. Direct-fit for Talaria MX4/MX5 headlight mount.
$42.99
+ shipping

Lighting
Plug-and-play LED tail light with brake response for Talaria / Sur-Ron / E-Ride Pro class e-motos.
$75.99
+ shipping

Lighting
Race-quality LED headlight kit listed for Sur-Ron Light Bee and Talaria e-motos. Confirm mount bracket for your fork/fender setup.
$229.99
+ shipping

Lighting
High-output headlight kit with Diode Dynamics Series 2 Pro, listed for Sur-Ron Light Bee and Talaria Sting MX3/MX4/MX5.
$260.99
+ shipping

Switches & Controls
Handlebar headlight on/off switch. Choose oval (Sumitomo) or square (Furukawa) connector variant to match your harness.
$25.99
+ shipping

Lighting
Plug-and-play turn signal + brake light kit for Sur-Ron, Talaria, and E-Ride Pro platforms.
$296.99
+ shipping
4 parts

Display
OEM 72V color TFT display for Talaria Sting MX5 Pro and Dragon. Not compatible with the 60V OLED on MX3 and MX4.
$198.99
+ shipping

Controls
OEM replacement throttle for Talaria Sting. Plug-and-play with the stock wiring harness. Dragon (2025) may use an updated throttle spec - confirm fitment before ordering.
$107.99
+ shipping

Controls
OEM key and battery isolation switch combo for Talaria Sting (2 keys included). Fitment on Dragon not confirmed - check with seller.
$63.99
+ shipping

Electrical Components
OEM DC-DC converter for Talaria Sting - steps battery voltage down to 12V for accessories like lights, horn, and display. Dragon fitment not confirmed.
$40.99
+ shipping
3 parts

Foot Pegs
Warp9 Sigma Elite CNC foot pegs designed for the Talaria Sting platform. Fitment on Komodo and Dragon not confirmed - check with your seller before ordering for those models.
$158.99
+ shipping

Foot Pegs
Warp9 adjustable footpeg mount with multiple position options for Talaria Sting. Fitment on Komodo and Dragon not confirmed due to different sub-frame design.
$207.99
+ shipping

Seat
OEM replacement seat for Talaria Sting MX3 and MX4. Dragon (2025) may use different seat mounting hardware - confirm fitment before ordering.
$70.99
+ shipping
1 part
5 parts

Seat Cover
Aftermarket seat cover for Talaria Sting. Multiple grip patterns (ribbed, waffle, bubble) and color options. Guts Racing is the top brand for this category. Check fitment note - MX3 and MX5 Pro may use different seat foam dimensions.
$86.99
+ shipping

Seat
Sting seat height 840mm. X3 seat height is 805mm - different seat.
$50.99
+ shipping

Seat Cover
Guts gripper cover for Talaria Sting seat pans (MX3/MX4/MX5). Confirm seat pan shape on Dragon.
$100.99
+ shipping

Seat Cover
USA-made Enjoy gripper seat cover for Talaria Sting MX3/MX4/MX5 pans.
$86.99
+ shipping

Seat
Complete Guts seat assembly with gripper cover for Talaria Sting platforms.
$172.99
+ shipping
10 parts

Fork Seals
SKF fork seals for common eMoto FastAce-class legs used across Talaria lineup. Confirm seal OD for Dragon fork.
$51.99
+ shipping

Rear Shock
FastAce rear shock with upgraded spring rate for Sur-Ron/Talaria-class e-motos. Confirm eye-to-eye and spring rate for Dragon weight.
$178.99
+ shipping

Rear Shock
KKE multi-adjust rear shock commonly fitted to Talaria/Sur-Ron platforms. Verify spring and length for Dragon.
$309.99
+ shipping

Front Fork
Long-travel Hawk33 Max Plus fork designed for Talaria MX5. Requires fork install bearing kit and may need triple-clamp verification on Dragon.
$1318.99
+ shipping

Fork Guards / Protectors
OEM left (brake-side) fork protector for Talaria MX5 stock forks.
$33.99
+ shipping

Fork Guards / Protectors
OEM right fork protector for Talaria MX5 stock front suspension.
$33.99
+ shipping

Rear Linkage
Pre-assembled 7075 billet linkage with bearings/seals for Talaria Sting MX3/MX4/MX5. Confirm linkage geometry on Dragon before ordering.
$104.99
+ shipping

Rear Linkage
Billet suspension triangle upgrade for Talaria Sting MX3/MX4/MX5 cast OEM units.
$113.99
+ shipping

Headset
Common 30x47x12mm headset/steering bearing used on Talaria and other light e-motos. Fits upper or lower depending on fork setup.
$23.99
+ shipping

Rear Shock
Shock body cover for trail abuse.
$21.99
+ shipping
1 part
6 parts

Grease
80W90 gearbox oil for the Talaria Sting gearbox. Change at first sign of dark or metallic appearance, or every 20 hours. Required for all Sting models - the X3 has no gearbox and does not need this service.
$553.99
+ shipping

Gear Oil
Required gearbox oil for all Talaria Sting models. Change every 10-20 hours of riding. 130ml is one full change.
$22.99
+ shipping

Chain Lubricant
Universal chain lubricant. Works on all chain-drive e-bikes. Wax formula reduces fling and keeps chain cleaner longer.
$22.99
+ shipping

Specialty Tools
Fork install bearing kit used when servicing Talaria forks. Choose the Talaria variant on the product page. Helps clean seal/service jobs.
$44.99
+ shipping

Gear Oil
GL-5 hypoid gear oil commonly used for Talaria gearbox service intervals.
$16.99
+ shipping

Chain Lubricant
Chain lubricant for O-ring/X-ring final drive chains on Talaria and other e-motos.
$16.99
+ shipping
18 parts

Rear Tube
19" rear inner tube for the Talaria Sting MX3, MX4, and MX4 Expert. The X3 uses a 17" rear - different tube. The MX5 Pro uses an 18" rear - also a different tube.
$20.99
+ shipping

Front Tube
Inner tubes for the Talaria Sting MX5 Pro's 21" front and 18" rear wheels. The MX5 Pro is the only Sting variant with full MX wheel sizing. Other Sting models use smaller wheels and require different tubes.
$12.99
+ shipping

Front Tire
OEM tire size for Talaria Sting MX3 and MX4. Dunlop MX34 is a popular intermediate-to-hard terrain choice. Multiple tire brands fit this size - Pirelli Scorpion MX and Maxxis Maxxcross SI are alternatives.
$107.99
+ shipping

Rear Tire
Rear tire for Talaria Sting MX3/MX4. Same tire platform as many OEM-spec mini-MX bikes. Replace front and rear together for best handling. Check rim lock availability for your rim.
$118.99
+ shipping

Front Tire
Direct fit for stock 19" front wheel on MX3/MX4. GritShift explicitly lists in Talaria MX3/MX4 collection. Anti-flex knob bridges for side-knob stability.
$124.99
+ shipping

Front Tire
Pirelli MX32 for stock 19" front wheel. Note: Pirelli does NOT make MX32 in 80/100-19 rear - for the MX3/MX4 rear wheel, stick with the OEM CST or consider the 19/16 wheel upgrade.
$72.99
+ shipping

Front Tire
GritShift lists explicitly in Talaria MX5 Pro collection. 21" front is the correct size for MX5 Pro, Dragon, and Komodo.
$179.99
+ shipping

Rear Tire
Explicitly listed in GritShift's Talaria Sting R MX5 collection. 90/100-18 is correct size for MX5 Pro / Dragon / Komodo 18" rear wheel.
$173.99
+ shipping

Front Tube
3mm wall tube reduces pinch flats significantly vs OEM 1-1.3mm tubes. Same product page also sells 80/100-21 (MX5 front) and 100/100-18 (MX5 rear).
$21.99
+ shipping

Rear Tube
Heavy-duty 2mm tube; select Dragon wheel size variant at checkout.
$16.99
+ shipping

Front Tube
Japanese IRC 3mm HD tube for 21" front MX tires on Dragon/Komodo/MX5 Pro.
$25.99
+ shipping

Rear Tube
Japanese IRC 3mm HD tube for 18" rear MX tires on Dragon/Komodo/MX5 Pro.
$25.99
+ shipping

Wheel Bearings
Double-sealed front wheel bearing + seal kit sized for Talaria MX5 hubs. Confirm Dragon hub ID before install.
$29.99
+ shipping

Wheel Bearings
MX5-specific rear wheel bearing kit. Not a universal Talaria fit - verify Dragon rear hub before ordering.
$28.99
+ shipping

Rear Tire
E-moto-focused 18" rear knobby designed for high-torque climb traction. Confirm stock rear wheel size on your Dragon build (18 vs 19).
$130.99
+ shipping

Rim Locks
Rim lock for knobby tire security at low pressure. Confirm rim channel width for your wheel.
$12.99
+ shipping

Rim
Auto-sourced 2026-07-07 from ECR collection for xxx.
$30.99
+ shipping

Wheel Hub Spacers
CNC aluminum front wheel spacers with O-rings, OEM dimensions. Sold as a pair.
$25.99
+ shipping