BRAKES·Brake Assemblies

TRP DH-R EVO Hydraulic Brakes - Surron / Talaria / E-Ride Pro

●AftermarketFeatured

$362.99

$12 flat shipping

ByTalaria

Returns within 30 days. Customer-initiated returns have a 10% restocking fee. See Returns policy.

Wired Whips LLC, 1438 S Sage Bloom Way, Saratoga Springs, UT 84045

Secure checkout by Stripe

Secured by Stripe · Your card info never touches our servers

$12 flat shipping

every US order

OEM & aftermarket parts

brand listed on each page

Fitment checked per model.

Ask us if unsure.

30-day returns

unused parts

VisaMastercardAmexApple PayGoogle Pay

→TRP DH-R EVO full brake set (front and rear hydraulic). Top-tier upgrade for Surron and Talaria Sting. Komodo uses a different caliper mount geometry - confirm fitment before ordering.
→Aftermarket upgrade — improved performance over stock
→Verified fitment for 11 bike models

About the Brake Assemblies

TRP's DH-R EVO is a four-piston hydraulic disc brake with a 9 mm lever piston, 5 mm hose, performance mineral oil, and a design intent for 2.3 mm rotors. TRP lists the front lever-and-caliper assembly at 310 g without rotor or adapter; the product is sold per lever/caliper side. Verified fitment on our page covers Sting MX3, Sting R MX4, Sting MX4 Expert, and Sting MX5 Pro. Komodo and Dragon remain unverified — catalog notes different Komodo caliper mount geometry. Bleed and pad bed-in with mineral oil only; do not pour DOT fluid into this system.

Specs

brand	TRP^[1]
model	DH-R EVO^[1]
caliper	4-piston^[1]
lever piston	9 mm^[1]
hose	5 mm hydraulic^[1]
intended rotor thickness	2.3 mm^[1]
fluid	Performance mineral oil^[1]
weight lever caliper	310 g front without rotor and adapter^[1]
type	Hydraulic disc brake (sold per lever/caliper side)^[1]

Install notes

Remove the stock lever and caliper as a hydraulic assembly if you are swapping both ends. Mount the DH-R EVO caliper with the correct adapter for your rotor diameter, route the 5 mm hose without sharp bends, and fill or bleed with performance mineral oil per TRP. Confirm pad clearance on a 2.3 mm rotor. Use torque values from TRP's instructions. Bed pads in with progressive stops before hard riding. Check Komodo mount geometry before attempting that unverified fit.

FAQ

Is this a full front and rear set?

TRP sells the DH-R EVO as a hydraulic disc brake per lever and caliper side. If you need both ends, order the quantity that covers front and rear. Specs above describe one lever-and-caliper assembly.

Will DH-R EVO fit Komodo?

Treat it as unverified. Komodo appears in catalog compatibility, but notes call out different caliper mount geometry. Verified rows are Sting MX3, Sting R MX4, Expert, and MX5 Pro.