E Ride Pro Pro SS 3.0

Skid Plate / Bash Guard - E Ride Pro SS

Skid Plate

Heavy Hitter 7075-T6 billet aluminum skid plate for E Ride Pro S / SS / 2.0 / 3.0 / SR. Protects the motor, controller, and phase wires. Dual front bash plates; replaceable bash plate.

OEM Front Fender (E7183)

Front Fender

OEM front fender (part E7183) for the E Ride Pro SS 2.0, SS 3.0, Pro S 17", and Pro S 16". Direct OEM replacement with the correct mounting tabs and profile. Mini and Mini R use a different fender part number.

OEM Rear Fender - Standard (E7076)

Rear Fender

OEM standard-length rear fender (E7076) for the E Ride Pro SS 2.0, SS 3.0, Pro S 17", and Pro S 16". Provides adequate splash coverage for trail riding. An extended version is also available for muddier conditions - verify your current fender length before ordering.

OEM Front Fender - E Ride Pro S / SS

Front Fender

OEM front fender plastic for E-Ride Pro S/SS platforms.

OEM Rear Fender - E Ride Pro S / SS

Rear Fender

OEM rear fender for E-Ride Pro S/SS platforms.

OEM Battery Cover - E Ride Pro

Side Panels / Plastics

OEM battery cover/panel for E-Ride Pro platform.

OEM Long Tail Fender - All E Ride Pro Models

Rear Fender

Long-tail rear fender option. Check clearance with tire size and mud flap kits.

OEM Mud Guard - E Ride Pro

Mud Flaps

OEM Mud Guard - E Ride Pro for E Ride Pro (Pro SR, Pro SS 3.0, Pro S 16" Fat Tire +3 more). Match photos, connectors, and mounting points to your bike before ordering.

OEM Rear Shock Mud Guard - All Models

Mud Flaps

Protects rear shock from roost. All E Ride Pro models.

OEM Mud Flap Kit (SHE78) - All Models

Mud Flaps

Updated OEM mud flap kit for all E Ride Pro models.

OEM Front Number Plate - E Ride Pro

Front Number Plate

OEM front number plate for full-size E Ride Pro.

OEM Skid Plate - SR & SS 3.0

Skid Plate

OEM skid plate for SR and SS 3.0 frames.

OEM Fender for Long Seat - E Ride Pro

Rear Fender

Fender designed to pair with long seat kits.

OEM Front Fender w/ 3 Bolts (SHE7083) - Pro S / SS / SR

Front Fender

OEM front fender with three bolts for Pro S / SS / SR.

OEM Rear Fender w/ 2 Bolts (SHE7085) - E Ride Pro

Rear Fender

OEM rear fender with two bolts for full-size E Ride Pro models including SR.

OEM Battery Latch Plate (E7515) - E Ride Pro

Battery Latch

OEM Battery Latch Plate (E7515) - E Ride Pro for E Ride Pro (Pro S 16" Fat Tire, Pro S 17", Pro SS 1.0 +3 more). OEM# E7515. Match photos, connectors, and mounting points to your bike before ordering.

OEM Mud Flap Kit (SHE7863) - E Ride Pro

Mud Flaps

OEM updated mud flap kit for Pro S / SS / SR platforms.

HAYES Dominion A4 Brake Kit for E Ride Pro

Accessories

Hayes Dominion A4 hydraulic brake upgrade kit for the E Ride Pro SS 3.0. The Dominion A4 offers better lever modulation and more adjustability than the stock system - a meaningful upgrade for trail riding where precise braking matters.

Lewis EP6+ eMoto Brakes

Accessories

Lewis EP6+ eMoto hydraulic brake kit for the E Ride Pro SS 3.0. Purpose-designed for electric motos with higher brake fluid capacity and better heat dissipation for repeated hard stops. Includes front and rear calipers, levers, and brake lines.

Heavy Hitter Skid Plate for E Ride Pro

Skid Plate

Heavy Hitter 3mm aluminum skid plate for the E Ride Pro SS 3.0. The motor and battery are exposed underneath - a proper skid plate is required before riding any terrain with rocks. Bolt-on fit, verified for the SS 3.0.

ODI Number Plate

Fender

ODI front number plate / headlight surround for the E Ride Pro SS 3.0. Replaces the stock headlight assembly for a cleaner MX look. Fits standard fork-mount positions. Available in multiple colors.

OEM Subframe - E Ride Pro

Subframe

OEM rear subframe for E-Ride Pro platform. Structural replacement part.

OEM Key Latch / Door Lock Switch Cover

Battery Latch

OEM key latch and lock switch cover protector.

OEM Mud Guard Flaps Kit (SHE7863) - Pro S / SS / SR

Mud Flaps

Mud guard flaps kit for Pro S / SS / SR to reduce roost on linkage and shock.

Talaria OEM Front Fender Type 2 (Type2FrontFender) - Cross-Compatible

Fenders

OEM Talaria fender that comes on newer Talaria bikes. Cross-compatible with Arctic Leopard XE Pro, E-Ride Pro, Ventus, and Zero XB platforms sharing same fork geometry.

OEM Key Latch / Door Lock Cover Cap - E Ride Pro

Battery Latch

OEM key latch / electric door lock cover protector.

DOT4 Brake Fluid - SS 3.0 / SR (Type 2) for E Ride Pro (Pro S 16" Fat Tire, Pro S 17" +4 more)

Brake Fluid

SS 3.0 and SR only - DOT4 Type 2 system. Do NOT use DOT3 on these models.

OEM Brake Lever Set - Type 2 DOT4 (SS 3.0 / SR)

Brake Levers

Type 2 brake system levers for SS 3.0 and SR. Do not use on Type 1 Mini/Pro S/SS 1.0/2.0.

OEM Front Brake Rotor - SS 3.0 / SR

Brake Rotor / Disc

OEM front rotor for SS 3.0 and SR. Confirm diameter vs any oversized aftermarket caliper bracket.

OEM Rear Brake Rotor - SS 3.0 / SR

Brake Rotor / Disc

OEM Rear Brake Rotor - SS 3.0 / SR for E Ride Pro (Pro SS 3.0, Pro SR). Match photos, connectors, and mounting points to your bike before ordering.

OEM Brake Pads (SHE7067) - SS 3.0 / SR

Brake Pads

OEM pad set listed for SS 3.0 / SR. Confirm caliper generation before order; Type 2 DOT4 systems only.

OEM Brake Pads Type 2 / Brake 2 (SHE7823) - SS 3.0 / SR

Brake Pads

Type 2 / Brake 2 (gold) pads for E Ride Pro SS 3.0 and SR DOT4 calipers. Not for Type 1/red-pad bikes or Mini Type 1 systems. Confirm reservoir cap has no E Ride Pro logo before ordering.

OEM Brake Lever Set Type 2 Adjustable (SHE7824) - SS 3.0 / SR

Brake Levers

Complete left+right Type 2 adjustable lever set for SS 3.0 and SR DOT4 masters. Not Type 1 fixed levers.

OEM Front Brake Rotor 220mm (SHE7061) - SS 3.0 / SR

Brake Rotor / Disc

220mm front brake disc for E Ride Pro SS 3.0 and SR. Use with Type 2 DOT4 calipers and correct rotor bolts.

OEM Rear Brake Rotor 220mm (SHE7060) - SS 3.0 / SR

Brake Rotor / Disc

220mm rear brake disc with screws for SS 3.0 / SR. 3.0mm thick OEM-style rotor.

TRP DH-R EVO Hydraulic Brakes - Surron / Talaria / E-Ride Pro

Brake Assemblies

TRP DH-R EVO full brake set (front and rear hydraulic). Top-tier upgrade for Surron and Talaria Sting. Komodo uses a different caliper mount geometry - confirm fitment before ordering.

OEM Front Brake Assembly (E6031) - Type 1 (Mini / Mini R)

Brake Caliper

OEM front brake caliper assembly for the E Ride Pro Mini and Mini R (Type 1 system). Complete caliper unit - replace if the piston is seized or bleed port is damaged. Confirmed fitment on Mini and Mini R only.

OEM Complete Front Brake Assembly - Type 2 (SS 3.0 / SR)

Brake Assembly (Complete)

Complete front brake assembly for Type 2 DOT4 SS 3.0 / SR.

OEM Complete Rear Brake Assembly - Type 2 (SS 3.0 / SR)

Brake Assembly (Complete)

Complete rear brake assembly for Type 2 DOT4 SS 3.0 / SR.

OEM Front Brake Hose - Type 2 (SS 3.0 / SR)

Brake Line / Hose

Type 2 front brake hose for SS 3.0 / SR. Bleed with DOT4 after install.

OEM Rear Brake Hose - Type 2 (SS 3.0 / SR)

Brake Line / Hose

Type 2 rear brake hose for SS 3.0 / SR. Bleed with DOT4 after install.

OEM Front Brake Hose Type 2 (E7845R) - SS 3.0 / SR

Brake Line / Hose

Factory Type 2 front brake hose with hardware for SS 3.0 / SR. Bleed with DOT4 after install. Not Type 1 hose.

OEM Rear Brake Hose Type 2 (E7845L) - SS 3.0 / SR

Brake Line / Hose

Factory Type 2 rear brake hose with hardware for SS 3.0 / SR DOT4 system.

OEM Rear Brake Assembly Type 2 DOT4 (E7766L) - SS 3.0 / SR

Brake Assembly (Complete)

Complete Type 2 DOT4 rear master/caliper assembly for SS 3.0 and SR. Not Type 1.

OEM Front Brake Assembly Type 2 DOT4 (E7766R) - SS 3.0 / SR

Brake Assembly (Complete)

Complete Type 2 DOT4 front brake assembly with hardware for SS 3.0 / SR. Replaces damaged master/caliper as a unit.

OEM Brake Pad Hardware Kit Type 2 (E7854) - SS 3.0 / SR

Brake Hardware Kit

Type 2 brake pad hardware/clip kit for SS 3.0 / SR calipers. Pair with SHE7823 pads.

Formula eMoto Brake - Front

Brake Assembly (Complete)

Complete Formula eMoto front brake upgrade popular on E Ride Pro / Surron / Talaria platforms.

OEM Front Brake Assembly - Type 2 DOT4 (SS 3.0 / SR) for E Ride Pro

Brake Caliper

SS 3.0 and SR ONLY. Incompatible with Type 1 parts.

OEM Right Grip

Grips

Right grip only. See eride-pro_multi_grips-oem-left for left grip.

OEM Left Grip (E7194)

Grips

All models. Left grip only. See eride-pro_multi_grips-oem for right grip.

OEM Wide Foot Pegs (SHE7030)

Foot Pegs

OEM wide-platform foot pegs for the E Ride Pro SS 2.0, SS 3.0, SR, Pro S 17", and Pro S 16". The wider platform improves stability under aggressive braking and in rough terrain compared to the standard-width OEM pegs.

ODI Emig Pro V2 Lock-On Grips - E Ride Pro (incl. Mini) for E Ride Pro (Mini, Mini R +6 more)

Grips

ODI Emig lock-on grips for the E Ride Pro SS and SR. Fit the standard 22.2mm handlebar diameter. Lock-on grips permanently eliminate grip rotation - a better choice than OEM slip-ons for any aggressive riding. Available in multiple colors.

Wide Platform Footpegs - E Ride Pro SS/SR

Foot Pegs

Wide platform footpegs for improved rider stability. Verify mounting tab spec before ordering - E Ride Pro frame peg mount dimensions should be confirmed.

OEM Wide Foot Pegs L&R (SHE7030) - E Ride Pro

Foot Pegs

OEM wide platform foot pegs, left and right set, for full-size E Ride Pro including SR.

OEM Wide Foot Pegs (SHE7030) - Pro S / SS / SR

Foot Pegs

OEM-style wide foot pegs for Pro S, SS 2.0/3.0, and SR.

CNC Wide Foot Pegs - E Ride Pro / Light Bee

Foot Pegs

CNC aluminum wide pegs with E Ride / Light Bee fitment option.

ODI Aluminum Bar End Plugs for E Ride Pro

Bar Ends

ODI aluminum bar ends for 7/8" e-moto bars. Color options on product page.

Warp 9 Elite Foot Pegs - E Ride Pro / Surron

Foot Pegs

Warp 9 Elite platform foot pegs - major grip upgrade for Pro S / SS.

Warp 9 Elite Foot Pegs - Surron / E Ride Pro

Foot Pegs

OEM Kickstand (330mm)

Kickstand

OEM 330mm aluminum kickstand for the E Ride Pro SS 2.0, SS 3.0, Pro S 17", and Pro S 16". This length is specific to the full-size SS and Pro S models - the Mini and Mini R use a shorter kickstand. Do not substitute if servicing multiple bikes.

OEM Handlebar 3" Rise - E Ride Pro SS / S

Handlebars

OEM 3-inch rise handlebar for E-Ride Pro S/SS. Standard 1-1/8 clamp.

OEM Right Footpeg Holder - E Ride Pro SS / S

Foot Peg Mounts

OEM right footpeg holder/bracket for E-Ride Pro S/SS.

OEM Foot Peg Mount Bracket (SHE7066) - All Models

Foot Peg Mounts

OEM foot peg mount bracket. Hardware may vary by model year.

OEM 2" Rise Handlebar - E Ride Pro

Handlebars

OEM 2-inch rise handlebar for full-size E Ride Pro.

OEM Kickstand - E Ride Pro

Kickstand

OEM kickstand for full-size E Ride Pro platforms.

OEM Handlebar 2" Rise (E7083) - S / SS / SR

Handlebars

2-inch rise OEM handlebar used across Pro S / SS / SR platforms.

OEM Handlebar Riser Direct Mount (SHE7007) - SS 3.0 / SR

Bar Clamp / Mount

Direct-mount handlebar riser for SS 3.0 / SR triple clamp interface.

OEM Handlebar 2" Rise - E Ride Pro

Handlebars

OEM 2-inch rise bar alternative to the 3" rise bar on Pro S / SS platforms.

Footpeg Pins, Springs & Washers Kit - E-Moto

Foot Peg Hardware

Replacement footpeg pins/springs/washers for E Ride Pro, Sur-Ron, and Talaria style pegs.

Warp 9 3" Rise Handlebar - E-Moto

Handlebars

Warp 9 3" rise e-moto handlebar. Popular upgrade over stock bars on Pro S / SS.

Warp 9 E Moto Adjustable Footpeg Mount

Foot Pegs

Warp 9 adjustable footpeg mount for the E Ride Pro SS 3.0. Repositions the pegs forward/back and up/down to optimize riding position. Useful for taller or shorter riders who find the stock position uncomfortable. VERIFY: product page currently lists Talaria Sting adjustable mount - confirm E Ride Pro bracket compatibility before selling as direct fit.

Warp 9 Foot Pegs for Surron Light Bee and E Ride Pro

Foot Pegs

Warp 9 aluminum foot pegs - compatible with both the E Ride Pro SS 3.0 and Sur-Ron Light Bee X. Wider platform and more grip pin coverage than OEM. An easy upgrade for riders who find the stock pegs too small or slippery.

D.I.D SUPER 420NZ3G Gold Chain

Chain

Premium D.I.D gold 420 chain. Select 120L or 132L to match your gearing.

D.I.D SUPER 420NZ3G Gold Chain

Chain

Premium D.I.D gold 420 chain. Select 120L or 132L to match your gearing.

OEM Drive Belt (E7006)

Drive Belt

0 uses a WIDER belt (20mm) - different part. This E7006 fits SS 2.0, Pro S, Mini, Mini R only.

OEM Drive Belt - SS 3.0 (E7327)

Drive Belt

SR and some upgraded SS 3.0 setups use the wider 20mm E7607 belt - do not mix widths without matching pulleys.

OEM Rear Sprocket 55T 420 - E Ride Pro

Rear Sprocket

OEM-spec 420 pitch 55T rear sprocket for E-Ride Pro chain drive. Replace with chain as a set when worn.

OEM SR Drive Belt - E7607 Class

Drive Belt

OEM SR wide drive belt (E7607 class). Also used on wide-pulley SS 3.0 builds - confirm belt width before ordering.

OEM 14T Jackshaft Sprocket (SHE7059) - SS 3.0 / SR

Front Sprocket

OEM 14T jackshaft sprocket kit with bolts for SS 3.0 / SR.

OEM Chain - SR / SS 3.0

Chain

OEM replacement chain for SR / SS 3.0 chain-drive configurations. Confirm pitch/length vs belt-drive bikes.

OEM 58T Rear Sprocket (E7537) - SS 3.0 (w/ screws)

Rear Sprocket

OEM 58T rear sprocket with mounting screws for SS 3.0; confirm carrier pattern on SR.

OEM Rear Sprocket 58T 428 (SHE7052) - SS 3.0 / SR

Rear Sprocket

58T 428 steel rear sprocket with five screws for chain-drive SS 3.0 / SR setups.

OEM Rear Sprocket 48T 428 (SHE7882) - SS 3.0 / SR

Rear Sprocket

48T 428 rear sprocket for taller gearing on SS 3.0 / SR chain conversions.

OEM RK 428 Gold Chain 114L (E7565) - SS 3.0 / SR

Chain

RK 428 x 114L gold chain for SS 3.0 / SR chain-drive configurations. Stock SR is belt - only for chain-converted bikes or jackshaft chain side as applicable.

OEM Front Sprocket 14T w/ Bolts (SHE7059) - SS 3.0 / SR

Front Sprocket

14T front sprocket set with bolts for SS 3.0 / SR chain systems.

OEM 420 Chain Drive Kit - E Ride Pro

Chain

OEM 420 chain drive conversion/kit for E Ride Pro belt bikes moving to chain drive.

EK 420 Drive Chain - E-Moto

Chain

EK 420 chain for E Ride Pro chain-drive conversions and replacements. Match link count to your sprocket setup.

Warp 9 Rear Sprocket 48T 420 (OEM Size)

Rear Sprocket

Warp 9 aluminum rear sprocket, 48T OEM-size option. Other tooth counts available on product page.

Warp 9 Chain & Sprocket Combo 48T + EK 420

Chain

Matched Warp 9 48T rear sprocket with EK 420 120-link chain. Replace as a set for even wear.

17" Supermoto Wheel Set - 79Bike / Sur-Ron / E-Ride Pro

Wheels

Complete 17" supermoto wheel set for road-legal conversions. Fits 79Bike Falcon platform and Sur-Ron LBX.

OEM Racing Chain Guide (SHE8050) - SS 2.5 / SS 3.0 / SR

Chain Guard

Racing chain guide for SS 3.0 / SR chain-drive builds.

OEM Jackshaft Cover - E Ride Pro

Chain Guard

OEM jackshaft cover/guard for E Ride Pro drivetrain.

OEM Jackshaft (E7417) - SS 3.0 / SR

Gearbox

Jackshaft for SS 3.0 / SR intermediate drive. For full assemblies see SHE7878 (SR).

OEM Inner Tubes (E7511) - E Ride Pro Mini / SS / SR

Tires & Tubes

OEM inner tubes for E-Ride Pro. Order part number matches your model's wheel size.

OEM Motor Pulley and Pulley Nut - E Ride Pro Mini / SS / SR

Drive System

OEM motor pulley and locking nut. The pulley interfaces with the drive belt - check yours if experiencing slipping.

OEM Control Switch - E Ride Pro

Switches & Controls

OEM left-side control switch cluster for E-Ride Pro models.

OEM Throttle - SS 3.0 / SR

Throttle

OEM throttle assembly for SS 3.0 and SR. Plug-and-play connector.

OEM Control Switch - SS 3.0

Switches & Controls

OEM left-side control switch cluster for SS 3.0 platform (also used on SR builds with same harness).

OEM Throttle (E7646) - SS 3.0 / SR

Throttle

OEM throttle for SS 3.0 and SR. Confirm connector matches your harness generation.

OEM Headlight Switch (E7215) - E Ride Pro

Switches & Controls

OEM headlight switch for E Ride Pro models.

72V 50Ah Battery Pack - Type A (E7271)

Battery

Standalone 72V 50Ah replacement battery for SS 3.0 and SR. Type A (E7271). Does not include battery tray or side supports - see eride-pro_ss-3-0_power-upgrade-kit for the full kit.

84V Charger - 2nd Generation

Charger

84V OEM charger (2nd generation) for the E Ride Pro SS 2.0, SS 3.0, SR, and Pro S models. 72V battery system only - never use on the original Mini which runs a 60V pack. Label your chargers if you own multiple E Ride Pro bikes.

OEM Display (E7023)

Display / Dashboard

SS 1.0, SS 2.0, Pro S models. NOT compatible with SS 3.0 or SR - those use E7022.

OEM Display (E7022)

Display / Dashboard

SS 3.0 and SR models only. NOT compatible with SS 2.0 or Pro S - those use E7023.

Main Wiring Harness (E7015)

Wiring Harness

Two variants exist - early (pre-2024) and late (2024+). Verify with retailer before ordering.

OEM 72V Charger (E7305) - E Ride Pro S / SS / SR / Mini R

Charger

Factory OEM charger for E-Ride Pro S, SS 2.0/3.0, SR, and Mini R packs. US 110V. Keep OEM charger for battery longevity.

OEM Display - Pro S / SS 2.0 / SS 3.0

Display / Dashboard

OEM display unit for Pro S / SS 2.0 / SS 3.0.

OEM Headlight & Bracket - SS Family

Lighting

OEM SS headlight assembly with bracket. Verify mount points on Pro S before install.

OEM Ignition Switch & Seat Lock Kit - All Models

Switches & Controls

OEM ignition switch and seat lock set. All E Ride Pro models.

OEM Battery Cable (Breaker) - SS 2.0 / SS 3.0

Wiring Harness

OEM battery cable for breaker-equipped SS 2.0/3.0 packs.

OEM Headlight LED (E7045) - Pro S / SS / SR

Lighting

OEM LED headlight unit used across Pro S, SS 2.0/3.0, and SR. Bracket/hardware sold separately on some kits (see SHE7047).

OEM Headlight Kit w/ Bracket & Bolts (SHE7047) - Pro S / SS / SR

Lighting

Complete off-road headlight kit with bracket and screws for Pro S / SS / SR.

OEM Taillight - E Ride Pro

Lighting

OEM Taillight - E Ride Pro for E Ride Pro (Pro S 16" Fat Tire, Pro S 17", Pro SS 1.0 +3 more). rear. Match photos, connectors, and mounting points to your bike before ordering.

GritShift Blazer LED Light Bar Headlight

Lighting

Compact GritShift Blazer LED bar with Pro S fitment.

LED Headlight Bar - Pro S / SS / SR

Lighting

LED headlight bar with bracket for Pro S / SS / SR. Sur-Ron-style connector.

OEM Display Cable - E Ride Pro S / SS / SR

Wiring Harness

OEM Display Cable - E Ride Pro (Pro S 16" Fat Tire +5 more) for E Ride Pro (Pro S 16" Fat Tire, Pro S 17", Pro SS 1.0 +3 more). Match photos, connectors, and mounting points to your bike before ordering.

OEM Voltage Converter (SHE7050) - Pro S / SS / SR

Sensors

OEM voltage converter module for Pro S / SS / SR electrical system.

OEM Ignition Switch & Seat Lock Kit (SHE7080) - E Ride Pro

Switches & Controls

Complete ignition switch and seat lock key set for E Ride Pro models.

OEM Bluetooth Dongle - E Ride Pro Mini / Pro S / SS 2.0 / SS 3.0

Connectivity

OEM Bluetooth dongle for E-Ride Pro app connectivity (ride stats, tuning). 2025 version.

OEM Main Wiring Harness (E7056) - E Ride Pro Mini / SS / SR / Road Legal

Electrical Components

OEM main wiring harness. Fits Mini, Mini R, SS 2.0/3.0, SR, and road-legal variants.

84V Charger - 3rd Generation

Charger

84V OEM charger (3rd generation, current) for the E Ride Pro SS 2.0, SS 3.0, SR, Pro S, and Mini R. Improved charge curve over the 2nd gen unit. 72V battery only - the original Mini uses 60V and requires a different charger.

Warp 9 E-Moto Big Light Kit

Lighting

Warp 9 high-output Big Light kit for e-moto night riding. Multiple colors.

GritShift Halo Headlight Kill Switch for E Ride Pro

Lighting

GritShift Halo headlight kill switch for the E Ride Pro SS 3.0. Inline switch to disable the headlight during trail or track use - headlights draw from the battery, and disabling them extends range by several percent. Plug-and-play installation.

OEM Display Mount - E Ride Pro

Display / Dashboard

OEM display mount bracket. Common across full-size E Ride Pro platforms.

OEM Display Cable - E Ride Pro (All-Model Hub)

Wiring Harness

OEM Display Cable - E Ride Pro (Pro S 16" Fat Tire +5 more) for E Ride Pro (Pro S 16" Fat Tire, Pro S 17", Pro SS 1.0 +3 more). Match photos, connectors, and mounting points to your bike before ordering.

OEM Headlight Bracket - E Ride Pro

Lighting

OEM Headlight Bracket - E Ride Pro for E Ride Pro (Pro SS 1.0, Pro SS 2.0, Pro SS 3.0 +3 more). Match photos, connectors, and mounting points to your bike before ordering.

OEM Headlight Bracket (E7408) - E Ride Pro

Lighting

OEM Headlight Bracket (E7408) - E Ride Pro for E Ride Pro (Pro S 16" Fat Tire, Pro S 17", Pro SS 1.0 +3 more). OEM# E7408. Match photos, connectors, and mounting points to your bike before ordering.

OEM Controller Mounting & Guard Components - E Ride Pro Mini / SS / SR

Electrical Components

OEM controller mounting bracket and guard. Fits Mini, Mini R, and full-size E-Ride Pro models.

OEM Throttle - E Ride Pro

Throttle

OEM throttle assembly for the E Ride Pro - compatible across SS 1.0, SS 2.0, SS 3.0, SR, Pro S, Mini, and Mini R. Cable-pull design. If return is sluggish, replace the cable and housing first before replacing the full assembly.

OEM 2.0 Power Upgrade Kit (E7749+E7422+SHE7097) - 72V 50Ah Battery (Type B), Tray & Side Supports

Battery

Full power upgrade kit for SS 3.0 and SR. Includes battery, tray, and side supports. Official bundle page https://www.eridepro.com/products/2-0-power-upgrade-kit-e7749-72v50ah-batterytype-b-e7422-battery-tray-she7097-left-right-side-battery-support returned 404 on 2026-09-25, so this SKU is not sellable. For the battery alone see eride-pro_ss-3-0_battery-type-a.

GritShift Blinder LED Light Bar Headlight

Lighting

Plug-and-play GritShift Blinder LED bar. Listed with Pro S / Pro SS fitment tags.

OEM 72V 50Ah Battery Pack (E7271)

Battery

OEM 72V 50Ah (3600Wh) Samsung cell battery for E Ride Pro SS 3.0 and SR. Verify fitment before ordering for other models.

OEM Jackshaft Bolt M12 - E Ride Pro

Bolt Kit

OEM M12 jackshaft bolt for E Ride Pro models.

Guts Racing Seat Cover

Seat Cover

Guts Racing replacement seat cover for the E Ride Pro SS 2.0, SS 3.0, Pro S 17", and Pro S 16". Better grip texture than OEM vinyl, more UV-resistant, and available in multiple colors. Use with existing foam or combine with a foam replacement.

OEM Standard Seat (E7165)

Seat

OEM replacement seat for the E Ride Pro SS 2.0, SS 3.0, Pro S 17", and Pro S 16". Same foam density and cover as stock. A good base for seat re-cover projects or a direct swap when the OEM cover tears.

OEM Replacement Seat (SHE7090) - E Ride Pro S / SS / SR

Seat

OEM short seat for Pro S / SS / SR. Factory foam and cover profile.

OEM Replacement Seat (Short) (SHE7090) - S / SS 2.0 / SS 3.0 / SR

Seat

OEM short seat for Pro S / SS 2.0 / SS 3.0 / SR platforms.

OEM Fatty Seat - E Ride Pro

Seat

OEM fatty/comfort seat option for full-size E Ride Pro platforms.

OEM Long Seat Kit - E Ride Pro

Seat

Complete OEM long seat kit for two-up / tall riders on full-size platforms.

OEM Fatty Short Seat (SHE7091) - E Ride Pro

Seat

OEM fatty short seat used across full-size E Ride Pro models including SR.

Guts Racing Complete Seat - E Ride Pro

Seat

Guts Racing complete seat assembly for E Ride Pro models.

SKF Fork Seals - FastAce Fork (SS 3.0 / SR)

Fork Seals

SKF seal kit for FastAce forks used on E Ride Pro SS 3.0 and SR (ALX32RC-class). Buy one kit per leg (two for a full fork service). Not for Mini/Pro S forks without confirming stanchion diameter.

EXT Arma MX Rear Shock - E Ride Pro SS / SR

Rear Shock

Replaces unavailable public OEM complete shock listings. Confirm spring rate and linkage for your exact model/year before install.

OEM Fork Guard Set - SS 3.0 / SR

Fork Guards / Protectors

OEM fork guards for SS 3.0 / SR FastAce forks.

OEM Complete Headset Kit - All Models

Headset

Complete OEM headset bearing kit for all E Ride Pro models.

OEM FastAce Fork Protectors L+R (SHE7002) - SS 3.0 / SR

Fork Guards / Protectors

Left and right FastAce fork protectors for SS 3.0 / SR forks.

FastAce ALX13RC 2.0 Front Fork - E-Moto

Front Fork

FastAce ALX13RC 2.0 fork upgrade used across Surron / Talaria / E Ride Pro. Confirm spring rate and install kit for Pro S.

FastAce Fork Version 2.0 - Surron / Talaria / E Ride Pro

Front Fork

FastAce V2 fork upgrade listed for Surron / Talaria / E Ride Pro. Confirm steerer/axle and brake mount for Pro S before install.

OEM Shock Linkage - E Ride Pro Mini / SS 3.0 / SR

Suspension Linkage

OEM rear shock linkage for Mini, Mini R, SS 3.0, and SR. The linkage transfers suspension forces from the swingarm to the shock.

Warp 9 + FastAce Gravitee AHX12RV Fork Upgrade Kit

Fork

Warp 9 + FastAce Gravitee AHX12RV performance fork upgrade kit for the E Ride Pro SS 3.0. Adjustable compression and rebound, more travel, and significantly better small-bump compliance than stock. Full kit includes triple clamp and mounting hardware.

KKE 37mm Performance Suspension Fork for Surron, Talaria, E Ride

Fork

KKE 37mm USD (upside-down) performance fork for the E Ride Pro SS 3.0 - also fits Sur-Ron Light Bee X and Talaria Sting. Meaningfully stiffer and better-damped than stock. USD design lowers unsprung weight and improves front-end feel on rough terrain.

Warp 9 Drop Crown Triple Clamp for FastAce Fork

Fork

Warp 9 drop crown triple clamp for the FastAce AHX12RV fork upgrade on the E Ride Pro SS 3.0. Required companion part when installing the FastAce kit - lowers front-end geometry for better trail handling. CNC machined 6061-T6 aluminum.

OEM Shock Linkage Liftable w/ Bolts (SHE7016) - SS 3.0 / SR

Rear Linkage

Liftable shock linkage with bolt kit for SS 3.0 / SR.

Fork Oil - E Ride Pro

Fork Oil

Fork oil for E Ride Pro suspension forks. Grade varies by model and year - verify against your fork spec before ordering. Most SS and Pro S models use 5W or 7.5W. Change when oil appears dark or milky, or every 40 hours in muddy conditions.

Maxima Chain Wax for E Ride Pro (Mini, Mini R +6 more)

Chain Lubricant

Universal chain lubricant. Works on all chain-drive e-bikes. Wax formula reduces fling and keeps chain cleaner longer.

Rear Tire 18" Kit - SS 2.0 / SS 3.0 / SR

Rear Tire

18" rear tire + tube + rim strip kit for E Ride Pro SS 3.0 and SR. SS 2.0 commonly uses a 16" rear - do not substitute. Mini and Pro S use different wheel sizes.

IRC Heavy Duty Tube 70/100-19 Front - SS / SR

Front Tube

3mm IRC heavy-duty tube, 70/100x19 front size. Fits E Ride Pro SS 2.0 / SS 3.0 / SR 19" front tires. Select the 70/100x19 (Front) variant on the product page.

IRC Heavy Duty Tube 100/100-18 Rear - SS 3.0 / SR

Rear Tube

3mm IRC heavy-duty tube for 18" rear. 100/100x18 variant also covers 90/100x18 rears. For E Ride Pro SS 3.0 and SR. SS 2.0 16" rear needs the 90/100x16 variant instead.

Dunlop MX34 Front Tire 70/100-19 - E Ride Pro SS 3.0 / SR

Front Tire

OEM front tire size for E Ride Pro SS 3.0 and SR. Check SS 1.0/2.0 for their specific tire size before ordering.

OEM Rear Wheel Axle (SHE7075) - E Ride Pro (All Models)

Rear Axle

OEM rear axle for all E-Ride Pro models.

OEM Front Axle Bolt - FastAce (SS 2.0 / SS 3.0 / SR)

Front Axle

OEM FastAce front axle bolt for SS 2.0 / SS 3.0 / SR.

OEM Rear Wheel Axle (SHE70) - All Models

Rear Axle

OEM rear wheel axle. Confirm length/thread for Mini vs full-size before install.

OEM Rear Wheel Hub Spacers (SHE79) - All Models

Wheel Hub Spacers

OEM Rear Wheel Hub Spacers (SHE79) - All Models for E Ride Pro (Mini, Mini R, Pro S 16" Fat Tire +5 more). OEM# SHE79. Match photos, connectors, and mounting points to your bike before ordering.

Rear Wheel Bearings - All Models

Wheel Bearings

Rear wheel bearing set for E Ride Pro platforms. Confirm OD/ID vs hub.

Front Wheel Bearings - All Models

Wheel Bearings

Front wheel bearing set for E Ride Pro platforms.

OEM Front Wheel - SS 3.0 / SR

Front Wheel (Complete)

OEM front wheel assembly for SS 3.0 / SR.

OEM Rear Wheel - SS 3.0 / SR

Rear Wheel (Complete)

OEM rear wheel assembly for SS 3.0 / SR.

OEM Front Wheel Bearing (E7967) - S / SS / SR

Wheel Bearings

Front wheel bearing for Pro S / SS / SR. OEM listing title is Front Wheel Bearing (E7967).

OEM Rear Wheel Bearings (E7968) - S / SS / SR

Wheel Bearings

Rear wheel bearings for Pro S / SS / SR (E7968).

OEM FastAce Front Wheel Axle (SHE7102) - SS 3.0 / SR

Front Axle

Front wheel axle for FastAce forks on SS 3.0 / SR.

OEM Front Wheel Bearings - E Ride Pro

Wheel Bearings

Front wheel bearing kit for E Ride Pro models including Pro S.

OEM Rear Wheel Bearings - E Ride Pro

Wheel Bearings

Rear wheel bearing kit for E Ride Pro models including Pro S.

OEM Rear Wheel Hub Spacers (SHE7963) - E Ride Pro

Wheel Hub Spacers

OEM rear hub spacers for E Ride Pro wheel installs.

Front Tire 70/100-19 - SS / SR (Dunlop MX34)

Front Tire

70/100-19 front tire size used on E Ride Pro SS 1.0/2.0/3.0 and SR. Dunlop Geomax MX34 soft-intermediate MX front. Pro S uses 17" fronts - not this size. Mini uses smaller wheels.