COCKPIT·Handlebars

Warp 9 Handlebar - 3" Rise 31.8mm (Sting MX3 / MX4)

Name: Warp 9 Handlebar - 3" Rise 31.8mm (Sting MX3 / MX4)
Brand: Warp 9
SKU: talaria_handlebar-warp9
Price: 109.99 USD
Availability: InStock

●AftermarketFeatured

$109.99

$12 flat shipping

ByTalaria

Returns within 30 days. Customer-initiated returns have a 10% restocking fee. See Returns policy.

WiredWhips LLC, 1438 S Sage Bloom Way, Saratoga Springs, UT 84045

Secure checkout by Stripe

Secured by Stripe · Your card info never touches our servers

$12 flat shipping

every US order

OEM & aftermarket parts

brand listed on each page

Fitment checked per model.

Ask us if unsure.

30-day returns

unused parts

VisaMastercardAmexApple PayGoogle Pay

→Warp 9 is a Talaria specialist brand. Confirmed compatible with MX3 and MX4. Requires Warp 9 Direct Bar Mount Stem or similar 31.8mm adapter.
→Aftermarket upgrade — improved performance over stock
→Verified fitment for 7 bike models

About the Handlebars

Warp9 e-moto handlebar S-HBAR-2 is 7075-T7 aluminum with a 31.8 mm clamp diameter, 80 mm (3 in) rise, 770 mm width, 9° backsweep, and 5° upsweep. It is a direct 31.8 mm bar — your stem or adapter must already be 31.8 mm direct-mount; a stock smaller clamp will not fit without the matching adapter called out in catalog notes. Verified fitment: Sting MX3, Sting R MX4, MX4 Expert, MX5 Pro, and xXx. Komodo and Dragon are unverified catalog rows only.

Specs

OEM part #	S-HBAR-2
clamp diameter	31.8 mm^[1]
rise	80 mm / 3 in^[1]
width	770 mm^[1]
backsweep	9 deg^[1]
upsweep	5 deg^[1]
material	7075-T7 aluminum^[1]
stem note	Requires 31.8mm direct bar mount / adapter (catalog/supplier)^[3]

Install notes

Photograph control placement, then loosen grips, levers, and perch clamps. Remove the old bar from the 31.8 mm stem (or install the 31.8 mm adapter first if you still have a smaller OEM clamp). Center the Warp9 bar, set roll to your preferred backsweep, torque stem bolts evenly to the stem maker's values, and re-mount controls without pinching hydraulic hoses. Recheck clearance at full lock. Do not assume Komodo clamp spacing matches Sting until you verify that unverified fit.

FAQ

What clamp size is this bar?

Warp9 lists 31.8 mm clamp diameter with 80 mm rise and 770 mm width. You need a 31.8 mm direct bar mount or adapter; it will not clamp correctly in a smaller OEM diameter without that adapter.

Is Komodo verified for this bar?

No. Komodo and Dragon are unverified catalog compatible models. Fitment used for verification covers Sting MX3, Sting R MX4, MX5 Pro, and XXX families on the sourced listing.