COCKPIT·Foot Pegs

Warp9 CNC Foot Pegs (S-PEG-2) - Sur-Ron / Segway / E Ride Pro

●AftermarketOEM# S-PEG-2Featured

$135.99

$12 flat shipping

BySur-Ron

Returns within 30 days. Customer-initiated returns have a 10% restocking fee. See Returns policy.

WiredWhips LLC, 1438 S Sage Bloom Way, Saratoga Springs, UT 84045

Secure checkout by Stripe

Secured by Stripe · Your card info never touches our servers

$12 flat shipping

every US order

OEM & aftermarket parts

brand listed on each page

Fitment checked per model.

Ask us if unsure.

30-day returns

unused parts

VisaMastercardAmexApple PayGoogle Pay

→Warp9 7075-T6 forged aluminum foot pegs. Heat-forging process ensures superior strength vs. cast competitors. Extra wide 57x87mm platform with exclusive 'Y' bridge for 4 center teeth. Uses OEM pivot pin and spring. Lifetime warranty from Warp9. Note: Talaria-specific pegs are a different SKU.
→Aftermarket upgrade — improved performance over stock
→Verified fitment for 8 bike models

About the Foot Pegs

These are Warp9 forged 7075-T6 aluminum foot pegs, maker part S-PEG-2, built around a 57×87 mm platform with permanent stainless teeth and a Y-bridge that adds four center teeth. The design reuses the bike's OEM spring and pin, so you are swapping platforms, not redesigning the pivot. Maker fitment covers Sur-Ron Light Bee / Light Bee 2 and Hyper Bee; we mark those verified. Storm Bee and Storm Bee GT appear only as unverified catalog compatibilities. Ultra Bee is listed under Does not fit — different chassis. Lifetime warranty is from Warp9 on the maker page.

Does not fit

Ultra Bee : Not listed on Warp9 Sur-Ron Light Bee / Hyper Bee foot peg fitment; Ultra Bee is a different chassis platform

Specs

OEM part #	S-PEG-2
material	7075-T6 forged aluminum^[1]
platform size	57 x 87 mm^[1]
teeth	Permanent stainless steel; exclusive Y-bridge adds 4 center teeth^[1]
uses oem pivot	Uses OEM spring and pin^[1]
warranty	Lifetime (Warp9)^[1]

Install notes

Support the bike, remove the OEM pivot pin and spring, and slide the stock peg off. Transfer the OEM spring and pin onto the Warp9 platform, seat the peg in the mount, and reinstall the pin. Confirm free pivot travel and that the teeth clear the crank or frame at full fold. No new hardware kit is required when the OEM spring and pin are reusable; replace damaged pins before riding.

FAQ

Do these pegs fit Ultra Bee?

No. Ultra Bee is listed under Does not fit. Maker fitment targets Light Bee / Light Bee 2 and Hyper Bee. Ultra Bee owners should use Ultra Bee–tagged footpeg listings instead of this multi-fit SKU.

Are Storm Bee pegs verified?

No. Storm Bee and Storm Bee GT show as unverified because they appear in catalog compatibility but not on the Warp9 Light Bee / Hyper Bee fitment list. Check mount spacing on your Storm frame before ordering.