Segway X160

Skid Plate / Bash Guard — Segway X260

Skid Plate

Bottom protection for motor and battery. Fitment varies between X260 and Xaber 300 platforms - confirm before ordering. Aluminum recommended over plastic for rocky terrain.

SXS UHMW Skid Plate — Sur-Ron / Talaria / Segway

Skid Plates

SXS UHMW 1/4" skid plate. Lighter and stronger than aluminum - slides over obstacles instead of catching. Very impact resistant, extremely difficult to break. Fits aftermarket controllers on Sur-Ron. Note: Some Talaria aftermarket controllers may not fit (BAC8000 rubs; EBMX X-9000 fits).

OEM Front Fender (X260)

Front Fender

X260 front fender. Available in OEM color variants. Not compatible with X160 (different fork diameter and wheel size) or Xaber 300 (different bodywork).

OEM Rear Fender (X260)

Rear Fender

X260 rear fender. Common crash damage item. Available in OEM colors.

OEM Side Panels / Shrouds (X260)

Side Panels / Plastics

X260 side shrouds/panels. Popular crash replacement. Available in OEM color options. Sold individually or as set - specify when ordering.

Skid Plate / Bash Guard (X260)

Skid Plate

Aluminum bash guard to protect motor and battery underside. Strongly recommended for trail and motocross use. Popular upgrade item.

Simulated Carbon Front Fender Type 1 — Segway X

Front Fender

Type 1 simulated carbon front fender for Talaria/Sur-Ron/Segway light-emoto front ends.

EBMX V2 Aluminum Bash Plate (X160 / X260)

Skid Plate

EBMX V2 aluminum bash plate for Sur-Ron Light Bee / Segway X160/X260.

GritShift Extended Rear Fender V2 w/ Side Shrouds

Rear Fender

GritShift extended rear fender V2 with side shrouds for Segway/Sur-Ron platform mud control.

Heavy Hitter V2 Skid Plate (X160 / X260)

Skid Plate

Heavy Hitter V2 skid plate for Segway X160/X260 / Sur-Ron - serious bash protection.

Aluminum Key Cover / USB Plate

Side Panels / Plastics

Aluminum key cover / USB plate for Segway X160/X260 cockpit area.

OEM Front Brake Pads — 4-Piston (X260 / X160)

Brake Pads

OEM part# 52191-YQ2A-0100. 4-piston hydraulic - compatible with Shimano H03C aftermarket pads. CRITICAL: verify brake fluid type (mineral oil vs. DOT) before servicing - do not mix. Most frequently replaced consumable on X260. Front and rear pads are the same part on most variants - verify before ordering.

OEM Rear Brake Pads — 4-Piston (X260 / X160)

Brake Pads

Same OEM part# as front (52191-YQ2A-0100) - front and rear use the same pad. Shimano H03C aftermarket pads are a popular and widely available replacement.

OEM Brake Lever Set (X260 / X160)

Brake Levers

Hydraulic lever set - sold as pair. Common crash damage item. Verify brake fluid type (mineral oil vs. DOT) before ordering - critical for seal compatibility.

KKE Adjustable Aluminum Brake Levers — Segway X160 / X260

Brake Levers

Confirmed compatible with Segway X160 and X260. Drop-in replacement for OEM Tektro hydraulic levers.

Tektro Mineral Oil Brake Fluid — Segway X-Series

Brake Fluid

CRITICAL: X260 uses Tektro hydraulic brakes requiring MINERAL OIL only. Do NOT use DOT fluid - it destroys the seals.

KKE Rear 220mm Disc Rotor with Adapter — Segway X160/X260

Brake Rotor / Disc

Wavy slotted 220mm rear rotor with caliper adapter and bolts. Fitment includes Segway X160/X260.

Galfer Brake Pads — Segway X / Sur-Ron / Talaria Calipers

Brake Pads

Galfer compound pads for stock Sur-Ron/Segway/Talaria-style calipers. Confirm front vs rear compound at order.

Warp9 220mm Front Brake Rotor — Segway X

Brake Rotor / Disc

Warp9 220mm front rotor for Sur-Ron and Segway hubs.

ASV F3-E Breakaway Brake Levers — Segway X Platform

Brake Levers

ASV F3-E breakaway levers used across Sur-Ron/Talaria light-emoto master cylinders; confirm perch match on Segway X.

KKE Front 220mm Disc + Adapter (X160 / X260)

Brake Rotor / Disc

KKE 220mm front brake disc with adapter kit for Segway X160/X260.

OEM Front Brake Rotor — 203mm (X260)

Brake Rotor / Disc

OEM front rotor is 203mm, 6-bolt. Popular upgrade: 220mm with adapter. Verify rotor/caliper compatibility if upgrading. Not compatible with Xaber 300 (220mm OEM).

OEM Rear Brake Rotor — 180mm (X260)

Brake Rotor / Disc

OEM rear rotor is 180mm 6-bolt. Wear item - replace when minimum thickness is reached.

TB Front Rotor Guard — Segway X

Brake Hardware Kit

Hydraulic Rear Foot Brake Kit (X160 / X260 platform)

Brake Assembly (Complete)

Hydraulic rear foot brake conversion kit for Sur-Ron/Segway platform. Includes master cylinder and banjo hardware.

DirtyBike Aluminum Rear Brake Disc Guard

Brake Hardware Kit

DirtyBike aluminum rear brake disc guard for Segway X160/X260.

Handlebar Grips (X260 / X160 / Xaber 300)

Grips

22mm bar diameter - standard dirt bike sizing. High-demand consumable. Many aftermarket options: ODI, ProTaper, Renthal Kevlar grips all fit the 22mm bars on all Segway models.

ODI Emig Racing Lock-On Grips (Segway X160/X260/Xaber 300)

Grips

Fits standard 22mm dirt bike handlebars on all Segway dirt bike models. Lock-on design preferred for off-road use.

Pro Taper Footpegs — Segway X260 / Xaber 300

Foot Pegs

Wide platform footpegs. Verify mounting tab dimensions match Segway frame spec.

Warp 9 Handlebar — 3" Rise 31.8mm (Segway X160 / X260)

Handlebars

31.8mm is the OEM clamp diameter for X260 - direct fit. Charged Cycle Works confirms X160/X260 fitment.

Warp9 Foot Pegs — Segway X / Light Bee Platform

Foot Pegs

Forged wide-platform Warp9 pegs for Sur-Ron Light Bee / Segway X / Ventus / E-Ride Pro class mounts.

ODI Ruffian Half-Waffle Grips — Segway X260

Grips

ODI Ruffian half-waffle MX grips. Standard 22mm bar diameter.

DirtyBike CNC Aluminum Foot Pegs — Segway X260

Foot Pegs

Extra-wide 7075 CNC pegs with stainless inserts. Listed for Sur-Ron LBX, E-Ride Pro, and Segway X260.

KKE Billet Footpegs (X160 / X260)

Foot Pegs

KKE billet aluminum footpegs for Segway X160/X260.

ODI Ruffian Half-Waffle Lock-On Grips — Sur-Ron / Talaria / Segway

Grips

ODI Ruffian half-waffle grips. Medium compound, closed end. Community top-seller - OEM grips are generic rubber. Available in 8 colors. Grip glue sold separately.

Warp9 CNC Foot Pegs — Sur-Ron / Segway / E Ride Pro

Foot Pegs

Warp9 7075-T6 forged aluminum foot pegs. Heat-forging process ensures superior strength vs. cast competitors. Extra wide 57x87mm platform with exclusive 'Y' bridge for 4 center teeth. Uses OEM pivot pin and spring. Lifetime warranty from Warp9. Note: Talaria-specific pegs are a different SKU.

OEM Handlebar (X260)

Handlebars

22mm bar diameter, 28.6mm stem clamp. Common crash damage item. Popular aftermarket upgrades: ProTaper, Renthal, or Fasst Flexx for reduced vibration and rider comfort.

SE Racing Full-Wrap Handguards — Segway X

Handguards

Warp9 3" Rise Handlebar — Segway X Platform

Handlebars

Warp9 3-inch rise bar for Sur-Ron/Segway/Talaria clamp patterns. Color options at checkout.

Warp9 Stem Lock — Segway X / Sur-Ron / Talaria

Stem

Warp9 stem lock / fender adapter for Sur-Ron, Talaria, E-Ride Pro, and Segway X clamp towers.

Warp 9 E-Moto Hand Guards — Segway X

Handguards

Warp9 full hand guards for e-moto bars.

Warp9 Adjustable Footpeg Mounts (X160 / X260)

Foot Pegs

Warp9 adjustable-height billet footpeg mounts. Replaces weak OEM peg pins; ±1" height adjust. Fits Segway X160/X260 / Sur-Ron LB platform.

CNC Footpeg Drop Brackets (X160 / X260)

Foot Pegs

CNC aluminum footpeg drop brackets for lower peg position on Segway X160/X260 platform.

DID 420 NZ3 Chain — Non-Ring Standard (Gold or Natural)

Chain

420 pitch non-sealed chain. OEM spec on Talaria Sting MX3 and MX4 (OEM link count: 100L). Segway X160/X260 also use 420 pitch and share aftermarket chain compatibility with Talaria Sting. Available in gold or natural steel. Sur-Ron Light Bee X/S OEM spec is 420 pitch (primary belt + 420 secondary chain). OEM link count: 106L for Light Bee X/S.

DID 420 VX X-Ring Chain — Sealed Premium (Gold or Natural)

Chain

PREMIUM UPGRADE over the 420 NZ3. DID's X-ring sealed 420 chain for Sur-Ron Light Bee X, Talaria Sting, and Segway X260/X160 riders who want longer chain life and less re-lubrication. X-ring seals retain grease internally - chain life index ~2,200 vs. ~400-600 for the non-sealed NZ3. Sur-Ron LBX stock: 106L. Talaria Sting MX3/MX4: 104L. NOTE: X-ring chains require a press-fit connecting link - do NOT use a standard clip link from the NZ3. Seal wear indicator: replace when seals show cracking or chain stretch exceeds 3%% of measured length. Not compatible with Talaria MX5 Pro (418 pitch) or Sur-Ron Ultra Bee (428 pitch).

DID 420 NZ3 Connecting Link — Clip Type (Pack of 5)

Chain

Essential consumable - always have spare connecting links. Replace connecting link every chain replacement. Clip (spring clip) type for DID 420 NZ3 non-ring chains. Do NOT use clip links on X-ring chains (VX series) - X-ring chains require a press-fit connecting link (420VXP). Sur-Ron LBX, Talaria Sting MX3/MX4, and Segway X160/X260 all use 420 NZ3 compatible clip links.

DID 420 VX Press-Fit Connecting Link — X-Ring Type

Chain

Required when rejoining a DID 420 VX chain after removal. X-ring connecting link includes x-ring seals and outer plate. Always replace the connecting link when re-installing an x-ring chain - never reuse a bent or removed connecting link. Compatible with Sur-Ron LBX, Talaria Sting MX3/MX4/Expert, Segway X160/X260 running the DID 420 VX chain.

DID 420 NZ3 Drive Chain 106L — Sur-Ron Light Bee X/S + Segway X160/X260 Stock Length

Chain

Stock chain specification for Sur-Ron Light Bee X and Light Bee S: 420 pitch, 106 links. CONFIRMED: Sur-Ron LBX uses 420 pitch - NOT 428 (a common misconception). Segway X260 and X160 also use 420 pitch and are compatible with the same chain. Segway manual specifies chain replacement at ~4,971 miles (8,000 km). 106L is correct for stock 14T front / 46T rear (Sur-Ron) or 14T/58T (Segway X260). If changing sprocket tooth counts, recalculate required link count. Duplicate entry of the general 420 NZ3 entry - this entry is spec-pinned for direct ordering. For sealed/premium upgrade, see DID 420 VX.

Drive Chain — #420 (X260 / X160)

Chain

IMPORTANT: Segway X260 and X160 use #420 chain - NOT #428 like Sur-Ron Light Bee. Per Segway manual, replace chain every ~4,971 miles (8,000 km). Always replace chain and sprockets together as a set.

OEM Rear Sprocket — 58T #420 (X260)

Rear Sprocket

OEM X260 rear sprocket is 58T - larger than Sur-Ron (46T) for different gearing. OEM part# 13204-YQ2A-0200. Aftermarket aluminum options available from Warp9 in multiple tooth counts. Replace with chain.

Heavy Hitter 420 Primary O-Ring Chain Drive Conversion Kit

Chain

Lightweight 420 O-ring primary chain conversion with billet rear sprocket and nitrided steel front sprocket. Maintains OEM gear ratio. Fits Segway X160/X260.

Warp9 E-Moto Aluminum Rear Sprocket — Segway X

Rear Sprocket

Warp9 aluminum rear sprocket for Sur-Ron/Segway 420-pitch platforms. Select tooth count at checkout.

EK 420SH Chain & Sprocket Bundle — Segway X Platform

Chain

EK 420SH chain with aluminum sprocket bundle. Compatible with Segway X160/X260 and peer light-emoto platforms.

Rippin Moto 54T Aluminum Sprocket — Segway X160/X260

Rear Sprocket

Lightweight 7075-T6 54T rear sprocket. Explicit fitment: Segway X160/X260, Sur-Ron LBX, Talaria Sting MX3/MX4.

Primary Drive 420 Gold Plated Chain

Chain

Primary Drive 420 gold chain. Select link count for your sprocket combo.

OEM Front Sprocket — 14T #420 (X260 / X160)

Front Sprocket

OEM front sprocket is 14T with #420 pitch - NOT #428. Replace simultaneously with chain. Popular to swap tooth count for gearing changes - always verify #420 pitch on replacements.

Heavy Hitter 420 Chain Drive Kit — Segway X160 / X260

Chain

Full 420-pitch chain drive kit for X260. Marketed as the lightest 420 kit available. Also fits Sur-Ron LBX and E Ride Pro.

Aluminum Chain Guard (X160 / X260)

Chain Guard

Billet-style aluminum chain guard for Segway X160/X260 / LBX platform.

OEM Throttle Assembly (X260 / X160)

Throttle

Hall-sensor throttle. High-demand consumable - degrades with use and exposure. Many aftermarket options available for 22mm bars.

OEM 84V Charger (X260 / X160)

Charger

84V output for 74V pack (X260 and X160). Do NOT use on Xaber 300 (72V nominal - different charger). Common loss/damage item - popular aftermarket replacement.

OEM Display / Dashboard (X260 / X160)

Display / Dashboard

Shows speed, battery level, and ride mode. Pairs with Segway app for speed unlock and diagnostics. Verify X160 vs. X260 variant - may differ slightly.

GritShift Blinder LED Headlight Kit — Segway X160 / X260 (Plug-and-Play)

Lighting

Confirmed plug-and-play for X160/X260. Retains factory bracket. IP67 waterproof. Excellent value.

OEM-Style Circuit Breaker (X160 / X260)

Switches & Controls

Replacement circuit breaker for Segway X160/X260 electrical protection.

GritShift Blazer LED Headlight

Lighting

GritShift Blazer LED headlight upgrade for Segway X160/X260.

Diagnostic / Programming Cable (X160 / X260)

Firmware & Diagnostics

USB diagnostic/programming cable for Segway X160/X260 controller access.

Titanium Front & Rear Wheel Bolt Kit

Titanium Bolts

Titanium wheel bolt kit covering front and rear for Segway X160/X260 platform.

Battery Lid Lock Cover Bolts (Set of 2)

Bolt Kit

Replacement battery lid lock cover bolts for Segway X160/X260.

Guts Racing Seat Cover — Segway X260 / Xaber 300

Seat Cover

Aftermarket seat cover for Segway X260 and Xaber 300. Verify fitment for X160 (smaller seat). Multiple grip textures and colors available.

Enjoy Ribbed Gripper Seat Cover — Segway X160/X260

Seat Cover

Ribbed gripper cover for stock Sur-Ron LBX / Segway X160/X260 seats. Color options at checkout.

Enjoy Gripper Seat Cover (X160 / X260)

Seat Cover

Enjoy Gripper seat cover for Segway X160/X260 - high-grip trails seat cover.

OEM Seat (X260)

Seat

OEM seat for X260. Not compatible with X160 or Xaber 300. Aftermarket seat covers and gripper covers available as a popular upgrade.

OEM-Style Replacement Seat — Segway X160/X260

Seat

Direct stock-style seat for Sur-Ron Light Bee / Segway X160 & X260 platform. Lock nuts not included.

DirtyBike Seat Riser X-Tension Kit — Segway X / LBX

Seat

Raises seat ~2.75" and shifts aft ~1.75" for taller riders on Sur-Ron LBX / Segway X platform.

OEM Front Fork (X260)

Front Fork

X260 front fork. ~260mm travel, 21" wheel. Popular upgrade target: FastAce, RockShox, or DNM units. Verify axle diameter (15mm) and steerer diameter for aftermarket fitment.

OEM Rear Shock (X260)

Rear Shock

OEM rear shock for X260. Popular upgrade: DNM, Marzocchi, or KYB units. Verify eye-to-eye length and mounting hardware before ordering aftermarket.

SKF 37mm Fork Seal Kit (per leg) — Segway X platform

Fork Seals

Confirm 37mm legs on X160/X260/Xaber. One kit per leg.

DirtyBike Suspension Triangle Needle Bearing Kit

Rear Linkage

Replaces loose/gritty suspension triangle needle bearings on Sur-Ron LBX / Segway X platform.

FastAce ALX13RC 2.0 Front Fork — Segway X Platform

Front Fork

FastAce ALX13RC 2.0 upgrade fork for Sur-Ron/Talaria/Segway light-emoto chassis.

Charged Fork Install Bearing Kit — Segway X / Sur-Ron

Headset

Fork install bearing kit for Sur-Ron, Talaria, E-Ride, and Segway X steering races.

KKE 550 lb Rear Shock Spring (X160 / X260)

Rear Shock

KKE 550 lb rear suspension spring for heavier riders / aggressive use on Segway X160/X260.

Warp 9 E-Moto Shock Cover — Segway X

Rear Shock

Protective shock cover for light-emoto rear shocks.

Chain Lubricant (Universal — All Segway Models)

Chain Lubricant

Universal chain lube - works on all Segway models (#420 chain). Consumable; recommend stocking DuPont or Motul chain lube. Critical for chain longevity. Lube after every wet ride.

Maxima Chain Wax — Universal Chain Lubricant

Chain Lubricant

Universal Segway e-moto owner maintenance item.

Maxima Synthetic Chain Lube — Segway X

Chain Lubricant

Motul Chain Care Kit Off-Road

Chain Lubricant

Motul off-road chain care kit (cleaner + lube). Use on O-ring/X-ring and non-ring chains per label.

Motul MC CARE E2 Moto Wash — 1 Liter Biodegradable Cleaner

Cleaners

Biodegradable spray-on rinse-off cleaner. Safe for plastics, paint, metals. Aerosol restrictions: ships ground only - no air to AK/HI/PR.

Motul MC CARE C4 Factory Line Chain Lube — 9.3 oz

Lubricants

High-speed chain lube for supermoto and performance e-moto. Light tack, minimal fling-off. Aerosol - no air shipping.

Rear Tire — 18" (X260)

Rear Tire

18" rear tire. OEM size 90/100-18. Same wheel diameter as Sur-Ron Light Bee X rear - some tire overlap. High-wear consumable, especially under aggressive off-road use.

Front Tire — 16" (X160)

Front Tire

X160 unique 16" front wheel - NOT compatible with X260 (21") or Xaber 300. Youth-specific sizing. Verify size carefully when ordering.

Dunlop MX34 Front Tire 70/100-21 — Segway X260 / Xaber 300

Front Tire

Standard 21" MX front tire for Segway X260 and Xaber 300. Dunlop MX34, Pirelli Scorpion MX, and Maxxis Maxxcross SI all fit this size.

Dunlop MX34 Rear Tire 90/100-18 — Segway X260 / Xaber 300

Rear Tire

Standard 18" rear tire for X260 and Xaber 300. Verify Xaber 300 OEM rear tire size before ordering - Xaber may differ.

Maxxis Maxxcross IT M7304 Front Tire 80/100-21 — Segway X260 / Xaber 300

Front Tire

Confirmed: X260 front is 80/100-21 (not 70/100-21). No Maxxis MX tire comes in 70/100-21 - that size does not exist in their lineup. Maxxcross IT is a GNCC/WORCS-proven intermediate-to-hard terrain tire.

Pirelli Scorpion MX32 Front Tire 80/100-21 — Segway X260 / Xaber 300

Front Tire

Premium Pirelli MX tire for X260 21" front. 90/100-21 also available at RevZilla for a wider contact patch.

Maxxis Maxxcross IT M7305 Rear Tire 100/100-18 — Segway X260 / Xaber 300

Rear Tire

Neither Maxxis nor Pirelli makes 90/100-18 for MX use - their 18" rear starts at 100/100-18. This is the standard premium aftermarket swap for the X260.

Parts Unlimited 21" Heavy-Duty Inner Tube 2.75/3.00-21 — Segway X260 / Xaber 300

Front Tube

21" heavy-duty inner tube (2.75/3.00-21) for the Segway X260 and Xaber 300 front wheel. Parts Unlimited heavy-duty spec - thicker sidewall than standard tubes, more puncture-resistant for trail use. The X260 runs a 21" front, same sizing as full-size MX bikes.

Parts Unlimited 18" Inner Tube 2.75/3.60 90/90-18 — Segway X260 / Xaber 300

Rear Tube

18" inner tube (2.75-3.60 / 90/90-18) for the Segway X260 and Xaber 300 rear wheel. Parts Unlimited spec. The X260 runs an 18" rear - standard MX sizing with broad tire selection available.

Heavy-Duty Front Inner Tube — Segway X

Front Tube

Heavy-Duty Rear Inner Tube — Segway X

Rear Tube

Sedona Heavy Duty 2mm Inner Tube — eMoto

Front Tube

Heavy-duty 2mm tube for eMX/eMoto sizes used on Sur-Ron and Segway X260. Select wheel size variant.

Shinko SR241 Trials Tire — Segway X / Sur-Ron

Rear Tire

Shinko SR241 trials tire usable front or rear on light-emoto sizes. Confirm size variant for X160 vs X260 wheels.

Kenda Washougal II Front Tire 60/100-14 — Segway X160

Front Tire

60/100-14 is the standard aftermarket front for the X160's 14" wheel. 70/100-14 is not a standard MX tire size.

Warp9 Lockdown Axle Blocks (X160 / X260 / Xaber)

Rear Axle

Warp9 lockdown axle blocks for precise chain tension and captive axle security. Fits Segway X160/X260/Xaber 300 e-moto platform.

Titanium Rear Axle + Nut (X160 / X260 / Xaber)

Rear Axle

Grade 5 titanium rear axle and nut set. Fits Segway X160/X260 platform (shared Sur-Ron LBX geometry). M12x1.25 typical.

Warp9 Titanium Pro Rim Locks (Pair)

Rim Locks

Warp9 titanium pro rim locks for e-moto tires on Segway X160/X260. Sold as pair-style listing - confirm qty on product page.

Front Wheel Spacers (Set of 2)

Wheel Hub Spacers

Front wheel hub spacers set of 2 for Segway X160/X260.

KKE Fork Axle End Nuts (Set of 2)

Front Axle

KKE fork axle end nuts set of 2 for Segway/Sur-Ron e-moto forks.