Rawrr Mantis (2024)

OEM Rear Fender (Rawrr Mantis)

Rear Fender

OEM plastic rear fender. Crash damage and rock strikes are common. Confirm color and year compatibility when ordering.

Warp 9 E-Moto Hand Guards

Frame Guards

Warp 9 e-moto hand guards for roost/brush protection. Confirm mount kit vs existing bar clamp setup on Mini vs full-size.

Acerbis X-Ultimate Handguards (Rawrr Mantis platform)

Frame Guards

Acerbis X-Ultimate handguards listed in Rawrr Mantis upgrade collections. Confirm bar diameter and mount kit.

ODI Downhill / E-Bike Number Plate

Front Number Plate

Universal e-moto number plate used on Mantis builds; confirm triple-clamp mount hardware.

OEM Number Plate (Rawrr Mantis)

Front Number Plate

Front number plate. MX racing standard fitment. Common crash damage. Aftermarket MANTIS CORE and KKE Racing plates available.

OEM Front Fender (Rawrr Mantis)

Front Fender

OEM plastic front fender for 21" wheel. Crash replacement item. Confirm color availability - 2023 vs 2024 colorways may differ.

SE Racing Full-Wrap Handguards - Rawrr Mantis

Frame Guards

SE Racing Full-Wrap Handguards - Rawrr Mantis for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis Mini R +2 more). Match photos, connectors, and mounting points to your bike before ordering.

OEM Side Shrouds / Body Panels (Rawrr Mantis)

Side Panels / Plastics

Side radiator shrouds / body panels. Available in OEM Rawrr colorways. Confirm left vs. right when ordering. 2023 and 2024 may share fitment - verify.

OEM-Style Front Brake Pads (Rawrr Mantis / 72V Mantis)

Brake Pads

Copper-fiber pad set verified for RAWRR Mantis X and 72V Mantis calipers (DOT 4). Single-set SKU covers front OR rear; buy two sets for full bike. Do not use mineral-oil pads.

Ceramic Rear Brake Pads (Rawrr Mantis / 72V Mantis)

Brake Pads

BLR ceramic pad set for RAWRR Mantis X & 72V Mantis. Single set fits front or rear; ceramic preferred at rear for modulation. DOT 4 system only.

DOT 4 Brake Fluid (Rawrr Mantis) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Brake Fluid

CRITICAL: Rawrr Mantis uses DOT 4 brake fluid exclusively. NEVER use mineral oil - it will destroy the seals. Unlike most e-bikes (Sur-Ron, Talaria) which use mineral oil, the Mantis is DOT 4. Flag this clearly in any brake fluid listing or cross-sell.

BLR Tuning Copper Fiber Brake Pads (Rawrr Mantis X / 72V Mantis)

Brake Pads

BLR Tuning copper-fiber pad upgrade listed for RAWRR Mantis X and 72V Mantis. DOT 4 hydraulic system - never use mineral oil. Confirm caliper pocket before install on X Pro.

KKE Aluminum Brake Levers (Rawrr Mantis / Mantis X)

Brake Levers

KKE machined aluminum replacement brake lever set for Rawrr Mantis and Mantis X. Easy bolt-on lever swap for crash damage.

Tusk Brake Lever Grip Covers

Brake Levers

Tusk lever grip covers for improved lever feel/comfort on Rawrr hydraulic brake levers.

BLR Ceramic Brake Pads (Rawrr Mantis / Mantis X)

Brake Pads

BLR ceramic pads for 72V Mantis / Mantis X OEM calipers. One set = front OR rear.

BLR Ceramic Rear + Copper Front Pad Combo (Rawrr Mantis)

Brake Pads

Matched front copper + rear ceramic pad combo for Mantis / Mantis X DOT 4 calipers.

220mm Front/Rear Rotor - Pre-2025 Mantis X 44 BCD

Brake Rotor / Disc

220mm rotor for pre-2025 Mantis X 44 BCD hub pattern. Confirm hub BCD before ordering on 2025+ bikes (54 BCD). Legacy full-size Mantis often shares 44 BCD - verify.

Hayes DOT 5.1 Brake Fluid 4 oz (DOT system) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Brake Fluid

DOT 5.1 fluid compatible with DOT 4 Mantis hydraulic systems. NEVER use mineral oil on Mantis brakes.

Sintered OEM-Style Brake Pads Kit F/R - Rawrr Mantis X / X Pro

Brake Pads

GritShift lists Rawr Mantis X and Mantis X Pro. Front+rear sintered pad kit.

OEM Front Brake Rotor - 220mm (Rawrr Mantis)

Brake Rotor / Disc

OEM front rotor is 220mm. Both front and rear are 220mm on the Mantis. Aftermarket Magura rotor kits are available as an upgrade - verify bolt pattern and caliper compatibility.

OEM Rear Brake Rotor - 220mm (Rawrr Mantis)

Brake Rotor / Disc

OEM rear rotor is 220mm - same diameter as front. 6-bolt mount. Consistent sizing simplifies parts stocking.

OEM Brake Lever Set (Rawrr Mantis)

Brake Levers

DOT 4 hydraulic lever set. Sold as a pair. Pro Mantis variant uses Magura MT-5E - confirm caliper model before cross-referencing. Common crash damage item.

KKE Rear Brake Disc Guard (Rawrr Mantis / Mantis X)

Brake Hardware Kit

KKE CNC rear disc guard for Rawrr Mantis 2023-2025 and Mantis X 2024-2025. Fits 220mm rear rotor only. Black/red color options.

ASV F3-E Unbreakable Brake Levers (Rawrr Mantis / Mantis X)

Brake Levers

ASV F3-E unbreakable lever set with stated fitment for Rawrr Mantis and Mantis X. Premium crash-resistant cockpit upgrade.

KKE Aluminum Rear Brake Disc Guard (Rawrr Mantis / Mantis X)

Brake Hardware Kit

CNC 6061-T6 rear disc guard to protect the thin rear rotor from rocks and stumps. Fitment listed for Rawrr Mantis and Mantis X.

Front Rotor Guard - Rawrr Mantis Mini R / Mantis

Brake Hardware Kit

Front Rotor Guard - Rawrr Mantis Mini R / Mantis for Rawrr (Mantis Mini R, Rawrr Mantis (2024), Rawrr Mantis (2023)). Match photos, connectors, and mounting points to your bike before ordering.

OEM Front Disc Brake Assembly DOT 4 (Rawrr Mantis / Mantis X)

Brake Assembly (Complete)

Complete OEM front brake assembly for Mantis X / 72V Mantis platform. DOT 4 fluid only - never mineral oil.

KKE Front Brake Disc Guard (Rawrr Mantis / Mantis X)

Brake Hardware Kit

KKE aluminum front disc guard listed for Sur-Ron LBX and Rawrr Mantis / Mantis X 2019-2024.

Formula eMoto Front Brake Kit (Rawrr Mantis platform)

Brake Assembly (Complete)

Confirm post-mount adapter and rotor size for your Mantis generation before install.

Warp 9 220mm Caliper Adapter Spacer Kit

Caliper Adapter

Spacer/adapter kit used when upsizing to 220mm rotors on e-moto platforms including Rawrr Mantis brake collection.

OEM Handlebar Grips (Rawrr Mantis)

Grips

22mm bar end diameter. High-demand consumable. MX riders replace frequently. Drop-in compatible with ODI, Pro Taper, Renthal Kevlar, and Guts Racing grip brands.

ODI Emig Racing Lock-On Grips (Rawrr Mantis) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Grips

ODI Emig Racing lock-on grips for the Rawrr Mantis. Fits the standard 22.2mm handlebar diameter. Lock-on design permanently eliminates grip rotation - a significant upgrade over the stock slip-ons for aggressive trail or track use. Available in multiple colors.

Tusk Grip Glue 5 ml for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Grip Glue

Tusk Handlebar Grip Glue, 5 ml tube. Measure bar diameter and lock-on vs glue-on before swapping.

KKE Billet Aluminum Foot Pegs (Rawrr Mantis / Mantis X)

Foot Pegs

KKE billet footpegs for Rawrr Mantis & Mantis X (2023-2025). Wider platform and better mud shedding than stock pegs.

EMoto-X Upgraded Foot Pegs (Rawrr Mantis Platform)

Foot Pegs

EMoto-X racing pegs marketed for all Rawrr bikes including Mantis X and Mini. Larger platform with aggressive grip pins.

ODI Half Waffle MX Grips (Rawrr Mantis Platform)

Grips

ODI half-waffle MX grips - universal 22mm bar end fit used across Rawrr Mantis cockpit setups.

ODI Full Waffle MX Grips (Rawrr Mantis Platform)

Grips

ODI full-waffle MX grips for Rawrr Mantis platform bars. High-turnover consumable.

Tusk MX Half-Waffle Grips (Rawrr Mantis Platform)

Grips

Budget Tusk MX half-waffle grips for Rawrr cockpits. Confirm lock-ring style vs twist-throttle clearance.

Tusk Handlebar Grip Glue for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Grip Glue

Grip glue for MX grip installs on Rawrr handlebars. Consumable install supply.

ODI Grip Donut Pads

Grips

ODI grip donuts to protect throttle housings and bar ends on MX-style Rawrr bars.

Renthal 50/50 MX Grips (Rawrr Mantis platform)

Grips

Universal MX 7/8" grips used on Rawrr Mantis bars. Soft/medium/hard compounds available.

BLR Billet Aluminum Foot Pegs (Rawrr Mantis X / X Pro)

Foot Pegs

BLR billet pegs marketed for Mantis X / X Pro 72V; many 72V Mantis chassis share peg mounts - verify pin diameter on legacy Mantis.

Renthal Grip Glue for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Grip Glue

Grip adhesive for MX grips on Mantis bars.

ODI Lock-On Half Waffle Grips (Rawrr Mantis platform)

Grips

Lock-on grips for e-moto bars; no grip glue required.

ProTaper Pillow Top MX Grips - Rawrr Mantis Platform

Grips

Half-waffle pillow top MX grips. Use grip glue; cut for lock-on throttle tube if needed.

OEM Handlebar (Rawrr Mantis)

Handlebars

MX-style tapered bar, ~28mm clamp diameter. Common crash damage item. Popular aftermarket brands: Pro Taper, Renthal, Tag Metals in standard 28mm MX taper profiles.

Warp 9 Handlebar 3" Rise (Rawrr Mantis platform)

Handlebars

31.8mm clamp Warp 9 3" rise bars used widely on Rawrr Mantis builds. Pair with direct-mount stem.

Warp 9 Direct Bar Mount Stem (Rawrr Mantis platform)

Stem

Direct-mount stem for e-moto cockpits including Rawrr Mantis collection listings.

ODI Aluminum Bar End Plugs - Rawrr Mantis Platform

Bar Ends

Universal ODI aluminum bar ends for 7/8" or standard MX bar end ID.

Warp 9 3" Rise Handlebars 31.8mm - Rawrr Mantis Platform

Handlebars

Requires 31.8mm stem (direct-mount or adapter). Popular e-moto bar upgrade.

Heavy Hitter 2" Riser Direct-Mount Stem 31.8mm - Rawrr Mantis Platform

Stem

Direct-mount riser stem for 31.8mm bars on e-moto top clamps.

Odi Ruffian Half-Waffle MX Grips for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Grips

Odi Ruffian Half-Waffle MX Grips for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). Measure bar diameter and lock-on vs glue-on before swapping.

Odi Ruffian No-Waffle MX Grips for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Grips

Odi Ruffian No-Waffle MX Grips for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). Measure bar diameter and lock-on vs glue-on before swapping.

Odi Rogue Single-Ply MX Grips for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Grips

Odi Rogue Single-Ply MX Grips for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). Measure bar diameter and lock-on vs glue-on before swapping.

DID 428 NZ Chain (428NZ) - Non-Ring Standard (Gold or Natural)

Chain

428 pitch non-sealed chain. OEM specification chain for Electric Motion Epure Race/Sport (DID 428 NZ Gold, 128 links, 11T front / 57T rear OEM). Talaria MX5 Pro uses 428 pitch - different from MX3/MX4 which use 420. Talaria Dragon and Komodo compatibility with 428 is probable (same platform tier as MX5 Pro) but requires. Rawrr Mantis confirmed 428 pitch. Replace chain and sprockets as a matched set.

DID 428 VX X-Ring Chain (428VX) - Sealed Premium (Gold or Natural)

Chain

Premium upgrade over the 428 NZ. X-ring seals reduce friction and extend chain life compared to non-sealed. DID describes this as their most popular on- and off-road chain. Chain Life Index 2,700 (vs. non-ring chains around 400-600). Compatible with the same 428-pitch models as the 428 NZ - select this for riders who want longer service intervals. Talaria Dragon and Komodo require.

DID 428 NZ Clip Connecting Link (428NZCL) - Non-Ring Type

Chain

For DID 428 NZ non-ring chain used on Sur-Ron Ultra Bee, Talaria MX5 Pro (note: MX5 Pro OEM specifies 418 pitch - verify before using 428 link), Rawrr Mantis, and Electric Motion Epure. Replace connecting link every chain swap - never reuse. Electric Motion Epure OEM chain is 428 x 128L.

DID 428 VX Press-Fit Connecting Link (428VXCL) - X-Ring Type

Chain

Required when re-joining a DID 428 VX x-ring chain. Includes x-ring seals. For Sur-Ron Ultra Bee and other 428-pitch bikes running the DID 428 VX sealed chain. Press-fit type - requires chain tool (chain breaker/press) for proper installation. Chain Life Index of 428 VX is approximately 2,700 - replace connecting link even if chain is reused.

OEM Front Sprocket - #428H (Rawrr Mantis)

Front Sprocket

Front (countershaft) sprocket, #428H pitch. Replace with chain as a set. Aftermarket tooth count changes available for gearing adjustment - verify pitch (428H) matches chain.

Warp 9 Rear Sprocket 54T #428 - Rawrr Mantis / Altis

Rear Sprocket

Warp 9 7075-T6 rear sprocket cut for Rawrr Mantis / Altis Sigma #428 drive. 54T stocked. Not Mini R wheel/hub pattern.

DID 420 NZ3 Connecting Link - Clip Type (Pack of 5) for Rawrr

Chain

DID 420 NZ3 Connecting Link - Clip Type (Pack of 5) for Rawrr for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). 420 pitch, non-ring, clip link. Match photos, connectors, and mounting points to your bike before ordering.

DID 420 VX Press-Fit Connecting Link - X-Ring Type

Chain

DID 420 VX Press-Fit Connecting Link - X-Ring Type for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). 420 pitch, x-ring, press-fit clip link. Match photos, connectors, and mounting points to your bike before ordering.

DID 428 NZ Clip Connecting Link - Non-Ring Type

Chain

DID 428 NZ Clip Connecting Link - Non-Ring Type for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). 428 pitch, non-ring, clip link. Match photos, connectors, and mounting points to your bike before ordering.

EK 428 O-Ring Chain (Rawrr Mantis / Altis)

Chain

EK SH-series 428 O-ring chain explicitly fitment-listed for Rawrr Mantis and Altis Sigma. Cut to length for sprocket size. Full-size Mantis uses #428H OEM pitch.

KKE 54T Aluminum Rear Sprocket (Rawrr Mantis / Mantis X)

Rear Sprocket

KKE 54T aluminum rear sprocket fitment includes Rawrr Mantis and Mantis X. Confirm chain pitch #428 and hub bolt pattern.

Steel Rear Sprocket 54T (Rawrr Mantis compatible)

Rear Sprocket

Steel rear sprocket with Rawrr Mantis listed in fitment. Multiple tooth counts available (52-60T).

DID 420 Standard Chain - Rawrr Mantis Platform

Chain

Universal 420 chain for e-moto platforms running #420. Confirm pitch on specific Mantis generation before install.

RK GB420MXZ Gold Heavy-Duty Chain 120L - Rawrr Mantis Platform

Chain

Heavy-duty 420 gold chain. Confirm pitch and cut to length for Mantis platform.

KKE Axle Chain Adjuster Blocks (Rawrr Mantis / Mantis X)

Chain Tensioner

KKE axle chain adjuster blocks listed for Rawrr Mantis and Mantis X. Improves adjuster durability vs stock blocks.

OEM Motor Oil Plug (Rawrr 72V Mantis)

Motor Cover

Genuine Rawrr motor oil plug for 72V Mantis family service intervals. Small but essential sealing hardware for gearbox/motor oil changes.

DirtyBike Magnetic Kill Switch (Rawrr Mantis)

Switches & Controls

Model-specific variants for Mantis, Mantis X, and Mantis Mini. Select correct harness variant at checkout.

OEM Main Wiring Harness (Rawrr Mantis)

Wiring Harness

Official Rawrr Mantis main harness. Electrical architecture differs on Mini R and some X revisions - confirm before ordering for X/X Pro.

Baja Style Headlight (Rawrr Mantis / Mantis X)

Lighting

Mantis/X Baja headlight from MANTIS CORE. Optional rock-light bundles available.

Extreme Bar Headlight (Rawrr Mantis / Mantis X)

Lighting

Bar-mounted extreme headlight kit for Mantis/X platform.

Warp 9 Titanium Rotor Bolts (RAWR Mantis option)

Rotor Bolts

Warp 9 Ti rotor bolt kit includes RAWR Mantis make/model option. Select OEM hub + front/rear as needed.

Warp 9 Titanium Sprocket Bolts

Titanium Bolts

Guts Racing Seat Cover - Rawrr Mantis

Seat Cover

Verify Rawrr Mantis-specific fitment - the Mantis is a smaller production brand and Guts Racing coverage may be limited. Check by year (2023 vs 2024 chassis).

Warp 9 E-Moto Shock Cover

Rear Shock

Warp 9 rear shock cover/sock for debris protection on e-moto shocks including Rawrr builds.

SKF 37mm Fork Seal Kit (per leg) - Rawrr Mantis platform

Fork Seals

SKF 37mm Fork Seal Kit (per leg) - Rawrr Mantis platform for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis Mini R +2 more). Match photos, connectors, and mounting points to your bike before ordering.

Warp 9 eMoto Shock Cover

Rear Shock

Front Fork Seals (Rawrr Mantis)

Fork Seals

Rfloxa replacement fork seal kit compatible with Rawrr Mantis X. Includes all seals needed for a fork service.

Stan's Biobased Wet Chain Lube - 120ml for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Chain Lubricant

Stan's Biobased Wet Chain Lube - 120ml for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). Stan's NoTubes. Match photos, connectors, and mounting points to your bike before ordering.

Maxima Chain Guard Lube for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Chain Lubricant

Maxima Chain Guard lubricant for Rawrr chain-drive models. Routine MX maintenance consumable.

Maxima Clean-Up Chain Cleaner

Chain Cleaner

Maxima Clean-Up chain cleaner for pre-lube service on Rawrr #420/#428 chain drives.

Maxima Chain Wax for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Chain Lubricant

Maxima Chain Wax for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis Mini R +2 more). Match photos, connectors, and mounting points to your bike before ordering.

Motul Chain Care Kit Off-Road for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +2 more)

Chain Lubricant

Motul off-road chain care kit (cleaner + lube). Use on O-ring/X-ring and non-ring chains per label.

Maxima Hi-Temp Waterproof Grease 16oz

Grease

Wheel bearing, linkage, and chassis grease for Mantis platform service.

Maxima Bio-Wash 32 oz

Cleaning Supplies

Bike wash for plastics, frame, and drivetrain cleanup after rides.

Maxima Chain Guard Care Kit for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Chain Lubricant

Complete chain clean/lube kit for #428 Mantis drivetrains.

BLR Gearbox Oil Change Kit (Rawrr 72V Mantis / X / X Pro)

Specialty Tools

BLR Tuning gearbox oil change kit listed for RAWRR 72V Mantis, Mantis X, and Mantis X Pro. Use model-correct fill volume from service docs.

Tusk 10-Piece Hex Key Wrench Set

Hex Key Set

Trail/tool-bag hex set for Mantis fasteners and cockpit hardware.

Magura MT Bleed Nozzle Set for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Specialty Tools

Magura MT Bleed Nozzle Set for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). Magura. Match photos, connectors, and mounting points to your bike before ordering.

Magura Bleed Syringe (24ml, Luer Lock) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more)

Specialty Tools

Magura Bleed Syringe (24ml, Luer Lock) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023) +3 more) for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). Magura. Match photos, connectors, and mounting points to your bike before ordering.

Warp 9 Tow Rope

Tow Rope

Compact tow rope for trail recovery - listed in Rawrr Mantis tools collection.

Chain Lubricant (Universal - Rawrr Mantis compatible)

Chain Lubricant

Chain lube critical for #428H longevity on MX terrain. Motul chain lube or DuPont PTFE-based lube recommended. Mud conditions require more frequent reapplication. High-velocity consumable - recommend stocking.

Chain Lubricant - Universal (#520 compatible) for Rawrr

Chain Lubricant

Chain Lubricant - Universal (#520 compatible) for Rawrr for Rawrr (Rawrr Mantis (2024), Rawrr Mantis (2023), Mantis X +2 more). Match photos, connectors, and mounting points to your bike before ordering.

Front Tire - 21" MX (Rawrr Mantis)

Front Tire

21" front MX tire for legacy full-size Mantis (21/18). Mantis X is 19/17 and Mini R is 17/14 - use model-specific tire SKUs.

Dunlop MX34 Front Tire 80/100-21 - Rawrr Mantis

Front Tire

Standard 21" MX front tire. Rawrr Mantis uses same wheel sizes as most full-size MX bikes.

Dunlop MX34 Rear Tire 100/100-18 - Rawrr Mantis

Rear Tire

18" rear tire for Rawrr Mantis. 100/100-18 is the OEM spec size.

Tusk Heavy Duty 2mm Tube

Front Tube

Tusk heavy-duty 2mm tube. Select the exact size variant for your wheel (Mini 12/14 vs X 19/17 vs legacy 21/18).

Heavy-Duty Rear Inner Tube - Rawrr Mantis

Rear Tube

Heavy-Duty Rear Inner Tube - Rawrr Mantis for Rawrr (Rawrr Mantis (2024), Mantis Mini R, Mantis X +2 more). Confirm size printed on the sidewall before you order a spare.

IRC Heavy Duty Front Tube 80/100-21 (Rawrr Mantis)

Front Tube

HD tube for full-size Mantis 21" front. Not Mini R 17/14 wheels.

IRC Heavy Duty Rear Tube 100/100-18 (Rawrr Mantis)

Rear Tube

HD tube for full-size Mantis 18" rear. Not Mini R.

Sedona HD 2mm Front Tube 80/100-21 (Rawrr Mantis)

Front Tube

Sedona 2mm HD tube - select 80/100-21 | 275/300-21 for full-size Mantis front.

Sedona HD 2mm Rear Tube 100/100-18 (Rawrr Mantis)

Rear Tube

Sedona 2mm HD tube - select 100/100-18 for full-size Mantis rear.

Tusk T-35 Front Tire 80/100-21 (Rawrr Mantis)

Front Tire

Value MX front for full-size Mantis 21" wheel.

Bridgestone Battlecross X31 Front 80/100-21 (Rawrr Mantis)

Front Tire

Premium soft/int front tire size for full-size Mantis.

Bridgestone Battlecross X31 Rear 110/100-18 (Rawrr Mantis)

Rear Tire

Wider 110/100-18 rear option for full-size Mantis 18" wheel. Confirm clearance vs stock 100/100-18.

Shinko SR241 Trials Front 2.75-21 (Rawrr Mantis)

Front Tire

Trials/hybrid front option for full-size Mantis 21".

Rim Strip

Tubeless Accessories

Rim strip for spoked wheels during tire/tube service on Mantis platforms.

Tusk Billet Aluminum Valve Stem Caps

Tubeless Accessories

Billet valve caps with core remover - universal fit.

Rear Tire - 18" MX (Rawrr Mantis)

Rear Tire

OEM rear tire for the Rawrr Mantis, 18" wheel. OEM spec is 100/100-18. Popular aftermarket replacements include Dunlop MX33, Kenda Millville, and Maxxis M-7305 in this size.

Front Inner Tube - 21" (Rawrr Mantis)

Front Tube

Standard 21" MX front tube. Schrader valve. High-volume consumable for MX riders. Heavy-duty thick-walled tubes reduce pinch flats on rough terrain.

Rear Inner Tube - 18" (Rawrr Mantis)

Rear Tube

Standard 18" MX rear tube. Schrader valve. Rear tubes take more abuse in MX - heavy-duty option recommended.