Ventus One Plus (V1+)

OEM Front Fender

Front Fender

OEM front fender. Color/variant details not confirmed on listing.

OEM Rear Fender

Rear Fender

OEM rear fender. Color/variant details not confirmed on listing.

Front Fender — Light Emoto Style (Ventus Compatible)

Front Fender

Light-emoto front fender shared across Sur-Ron/Talaria/Segway-class frames; Ventus One uses the same front mount pattern. Confirm colorway preference.

OEM Rear Fender — Charged Cycle Works Listing

Rear Fender

CCW OEM rear fender listing for Ventus One and One+. Alternate source to Ventus Bikes USA rear fender SKU already in catalog.

OEM Skid Plate — Ventus One / One+

Skid Plate

OEM Ventus One / One+ skid plate from Ventus Bikes USA and Pinned Electric.

OEM Front Battery Protection Plate (Ventus)

Skid Plate

Front battery protection plate OEM from Pinned Electric. Complements main under-bike skid plate.

Simulated Carbon Front Fender Type 1 — Ventus One

Front Fender

Type 1 fender for Talaria/Sur-Ron/Segway/Ventus front ends.

OEM Front Number Plate

Front Number Plate

OEM front number plate for Ventus One / One+ bodywork.

OEM Skid Plate - Ventus One / One+

Skid Plate

OEM V1/V1+ skid plate.

OEM Rear Mud Guard (Ventus)

Mud Flaps

Additional rear mud guard that works with the OEM rear fender to reduce spray onto the frame and rider.

OEM Battery Tray Support Base

Battery Support Block

OEM battery tray support base for Ventus One battery bay.

OEM Front Battery Protection Plate - Ventus One / One+

Battery Support Block

Metal front battery protection plate (support block class), not a plastic tray.

Talaria OEM Front Fender Type 2 — Cross-Compatible

Fenders

OEM Talaria fender that comes on newer Talaria bikes. Cross-compatible with Arctic Leopard XE Pro, E-Ride Pro, Ventus, and Zero XB platforms sharing same fork geometry.

OEM Brake Pads — DOT4 System (V1+)

Brake Pads

OEM DOT4 pads for V1+ 74.2 mm caliper spacing (pre/standard). Confirm caliper matches product photo before ordering; later EVO 95.5 mm calipers need different pads. Not for mineral-oil V1.

OEM Front Brake Rotor / Disc — 220mm x 2.3mm (Old Style)

Brake Rotor / Disc

OEM 220mm x 2.3 front disc (old-style listing). Confirm bolt pattern/rotor thickness against your hub before ordering.

OEM Rear Brake Rotor / Disc — 203mm x 2.3mm

Brake Rotor / Disc

203mm rear rotor. Listed as Ventus OEM - verify fitment for V1 vs V1+ as brake caliper specs differ between models.

TB Front Rotor Guard — Ventus V1

Brake Hardware Kit

Front rotor guard for Ventus.

Galfer Brake Pads — Ventus One

Brake Pads

Galfer pads for Sur-Ron/Segway/Talaria-style calipers used on Ventus.

Warp9 220mm Front Rotor — Ventus One

Brake Rotor / Disc

220mm Warp9 front rotor for Light Bee-class hubs.

ASV F3-E Breakaway Levers — Ventus One

Brake Levers

ASV F3-E levers for Sur-Ron/Talaria-class masters used on Ventus.

OEM Front Brake Assembly — Complete (V1+)

Brake Assembly (Complete)

⚠️ Product description states 'For older Ventus bikes; purchased prior to 4/20/2026.' V1+ bikes purchased after this date may have a revised caliper spec. Verify caliper bolt spacing (74.2mm) before ordering.

OEM Rear Brake Assembly — Complete (V1+, pre-4/20/2026)

Brake Assembly (Complete)

⚠️ For V1+ bikes purchased PRIOR to 4/20/2026 only. Caliper bolt spacing 74.2mm. Bikes purchased after 4/20/2026 have a different updated caliper - contact Ventus/Pinned Electric for current spec.

OEM Brake Line / Hose (V1+)

Brake Line / Hose

OEM brake line for V1+ DOT4 system. Position (front/rear) not confirmed on listing.

TB Front Rotor Guard — Ventus

Brake Hardware Kit

Front rotor guard; verify rotor diameter clearance on Ventus calipers.

OEM Rear Brake Bracket

Brake Hardware Kit

OEM rear brake caliper/bracket mount for Ventus One platform.

Magura MT7 PRO E-Moto Brake — 1-Finger HC Lever

Brake Systems

Sold individually - order 2 for front and rear. 5-year leak-proof guarantee. Award-winning gravity/enduro brake used by Fabio Wibmer and Danny MacAskill.

Magura MT5 HC1 E-Moto Brake — Neon Red (US Exclusive)

Brake Systems

US-exclusive neon red edition. Sold individually - order 2 for front + rear. 5-year leak-proof guarantee.

OEM Front Brake Caliper Bracket - Ventus One / One+

Caliper Adapter

OEM front brake caliper bracket for V1 / V1+.

OEM Left Grip

Grips

Left handlebar grip only. Right grip is included with the throttle assembly (see ventus_multi_throttle-with-grip).

OEM Left Foot Peg

Foot Pegs

OEM left foot peg for the Ventus Aetos. Direct OEM replacement for the left side peg assembly. Replace if bent from a crash or if the grip pins are worn smooth - worn pegs significantly reduce foot grip and control in aggressive riding.

OEM Right Foot Peg

Foot Pegs

OEM right foot peg for the Ventus Aetos. Direct OEM replacement. The right peg takes the most abuse in left-side tip-overs. Replace if the pin is bent or the peg body is cracked.

ODI Emig Pro V2 Lock-On Grips — Ventus

Grips

Lock-on MX grips for Ventus V1 / V1 Plus bars.

ODI Ruffian Half-Waffle MX Grips — Ventus

Grips

Half-waffle MX grips.

Wolf Tooth Fat Paw Lock-On Grips — Ventus

Grips

Extra-plush lock-on grips for trail comfort.

ODI Universal Lock-On Half-Waffle Grips — Ventus V1

Grips

Universal lock-on half-waffle grips for 7/8" bars.

Renthal Kevlar Dual-Compound Grips — Ventus V1

Grips

Renthal dual-compound MX grips. Glue-on.

Warp9 Foot Pegs — Ventus One

Foot Pegs

Warp9 pegs listed for Ventus One / Sur-Ron / E-Ride Pro mounts.

ODI Ruffian Half-Waffle Grips — Ventus One

Grips

ODI Ruffian grips for 22mm bars.

Tusk Handlebar Grip Glue — Ventus

Grip Glue

Grip glue for slip-on installs.

SE Racing Full-Wrap Handguards — Ventus

Handguards

Full-wrap handguards for V1 / V1 Plus.

OEM Handlebar (Ventus)

Handlebars

OEM Ventus handlebar from Ventus Bikes USA / Pinned Electric.

Warp9 3" Rise Handlebar — 31.8mm (Ventus)

Handlebars

31.8mm center clamp eMoto bar. CCW fitment tags include Ventus One / One+. Match to OEM or aftermarket direct-mount clamp diameter.

Renthal FatBar MX Handlebar — 28.6mm

Handlebars

Standard 28.6mm (1-1/8") fatbar. Fits Ventus One clamp/stem when stock bars are 28.6mm - verify clamp diameter before order.

OEM Handlebar Direct Mount / Bar Clamp (Ventus)

Bar Clamp / Mount

OEM Ventus direct-mount handlebar clamp from Pinned Electric.

Warp9 3" Rise Handlebar — Ventus One

Handlebars

Warp9 3" rise bar for Ventus clamp pattern.

Warp9 Stem Lock — Ventus One

Stem

Stem lock / fender adapter for Light Bee-class towers.

Warp 9 Hand Guards — Ventus One

Handguards

Warp9 handguards for e-moto bars.

OEM Left Foot Peg Mounting Bracket

Foot Peg Mounts

OEM left foot peg mounting bracket for Ventus One / One+.

Prickly MX Foot Pegs — E-Ride Pro / 79Bike / Ventus (7075 Billet)

Foot Pegs

Made in California. Black variant in stock ($170), Silver ($160) out of stock. Fits OEM spacers on E-Ride models. Peg brackets sold separately.

OEM Foot Peg Supporting Strut - Ventus One / One+

Foot Peg Hardware

OEM foot peg supporting strut for Ventus One and One+.

OEM Kickstand - Ventus One / One+

Kickstand

Merch by title Kickstand (Pinned handle wrongly references spring). Full stand, not the spring SKU.

OEM Left Foot Peg Bracket - Ventus One / One+

Foot Peg Mounts

OEM left foot peg mounting bracket for V1 / V1+.

OEM Right Foot Peg Bracket - Ventus One / One+

Foot Peg Mounts

OEM right foot peg bracket for V1 / V1+.

OEM Kickstand Spring - Ventus One / One+

Kickstand Spring

OEM kickstand spring only (not the full stand).

OEM Gold Chain — 108 Link

Chain

OEM 108-link gold chain. Pitch not confirmed - verify before ordering. The Ventus platform uses a jackshaft intermediate drive; this chain may serve the motor-to-jackshaft stage. V1+ primary drive is belt (VTB Carbon Belt) but jackshaft chain may still apply.

OEM Primary / Front Sprocket — 14T

Front Sprocket

14-tooth primary (front/motor) sprocket. Out of stock at time of research. Chain pitch not confirmed - verify before ordering.

OEM Rear Sprocket — 52T

Rear Sprocket

52-tooth rear sprocket. Chain pitch not confirmed - verify before ordering.

OEM VTB Carbon Belt — Light Emoto Platform (V1+)

Drive Belt

VTB Gen 2 carbon fiber belt for V1+ Light Emoto platform. The V1+ ships with this belt as a key drivetrain component. Also sold as 'VTB Carbon Belt' for Sur-Ron Light Bee fitment.

Heavy Hitter 420 Chain Drive Conversion — Ventus One

Chain

420 O-ring primary conversion kit; Ventus shares Light Bee drive geometry.

Warp9 Aluminum Rear Sprocket — Ventus One

Rear Sprocket

Warp9 e-moto sprocket for Light Bee-class carriers.

EK 420SH Chain & Sprocket Bundle — Ventus One

Chain

EK 420 bundle for Light Bee-class bikes including Ventus.

OEM Chain Guard

Chain Guard

OEM chain guard for Ventus One platform. Useful after chain/sprocket service.

OEM Axle Block / Chain Adjuster (Pair)

Chain Tensioner

OEM axle block / chain adjuster set of 2 for Ventus swingarm.

OEM Axle Block / Chain Adjuster - Ventus One / One+

Chain Tensioner

OEM axle block / chain adjuster for V1 / V1+.

OEM Chain Guard - Ventus One / One+

Chain Guard

OEM chain guard for V1 / V1+.

EBG Carbon Belt Drive – Replacement Belt

Belt Drive

Replacement belt for EBG belt drive conversion system. Full conversion kit required for initial install.

OEM Throttle with Right Grip

Throttle

Includes right-side grip. Available in versions 1.6 and 1.7 - select version matching your bike's controller/firmware generation. Hall sensor type not confirmed.

OEM Left Hand Control (Kill Switch / Mode / Horn Cluster)

Switches & Controls

Left handlebar control cluster. ⚠️ Version-specific - available for v1.6 and v1.7 firmware generations. Exact functions (kill switch, horn, mode selector, regen brake) not confirmed on listing page.

OEM Thumb Regen Brake Control

Switches & Controls

OEM thumb regenerative brake control for Ventus One / One+. Direct factory replacement.

OEM Display PET Screen Protector

Display / Dashboard

PET screen protector for the OEM Ventus display glass.

OEM Charger — 72V Ventus (Factory)

Charger

Factory Ventus OEM charger for V1/V1+ battery ecosystem. 2026-09-05 price verified at $295 on Ventus Bikes USA / Pinned.

OEM Display / Dashboard

Display / Dashboard

OEM Ventus display. Connector variants: 1.8 and older split to 4 connectors; 1.9 splits to 2 connectors - confirm harness generation before ordering.

OEM Main Wiring Harness

Wiring Harness

Main wiring harness. Also available: V9600 Wiring Harness (Version 1.6 & Older) from $60 and Ventus Mid Wiring Harness at $60. Verify which harness matches your specific controller version.

Billet Aluminum Throttle Tube — Ventus V1

Throttle

Aftermarket billet throttle tube - confirm grip ID and throttle housing.

VTB EVO GT 72V 50Ah Battery Pack (Ventus One Fitment)

Battery

VTB EVO GT high-discharge pack listed by Charged Cycle Works for Sur-Ron Light Bee and Ventus One / One+. Includes 15A charger on CCW listing. Confirm BMS/connector generation and controller compatibility before install.

Ventus Battery EVO GT 72V 51Ah Upgrade Pack (V1 / V1+ Tray Class)

Battery

Ventus Bikes USA EVO GT 72V 51Ah pack in Light Bee tray class for V1 / V1+. Sold as a high-capacity upgrade pack; charger included. Some stock controllers need a matching aftermarket controller/BMS handshake - confirm your build before purchase.

VTB Aetos Pro Controller / ESC — 72V Gen.2

Controller / ESC

Aetos Pro is the 72V-class VTB controller matching stock Ventus One / One+ battery voltage. Bike-specific V9600 harness sold separately. Prefer Pro over Max/Ultra for stock 72V packs (Max is 96V-class).

Ventus GiO2 40W Dual-Beam Headlight

Lighting

Ventus-branded GiO2 40W dual-beam auxiliary/premium headlight for Light Emoto platforms including Ventus One class bikes.

GiGigo Gi02-S Upgraded Headlight

Lighting

Gi02-S upgraded eMoto headlight. Pinned tags include Ventus One Parts / V1+. Confirm bracket/harness for your display/number-plate mount.

OEM Taillight (Ventus)

Lighting

OEM Ventus taillight from Pinned Electric.

Baja Designs S2 Sport Headlight Kit

Lighting

Baja Designs S2 Sport kit used on Sur-Ron/Talaria light-emoto bars; Ventus One accepts the same bar-mount pattern with included hardware.

OEM Display Bracket

Display / Dashboard

OEM mounting bracket for the Ventus display unit.

VTB Fast Charger — 1200W

Charger

Ventus/VTB 1200W fast charger for reduced charge time versus the stock OEM brick. Confirm connector and pack charge profile before use.

OEM Dual Battery Leads

Wiring Harness

OEM dual battery lead harness for Ventus dual-pack setups.

OEM Mid Wiring Harness

Wiring Harness

OEM mid wiring harness section for Ventus One electrical system.

OEM Key Lock Ignition Cover

Switches & Controls

OEM key-lock ignition cover for Ventus One / One+.

OEM Push Button Starter Assembly - Ventus One / One+

Switches & Controls

OEM push button starter assembly for V1 / V1+.

OEM Tilt Sensor Switch - Ventus One / One+

Sensors

OEM tilt sensor switch for V1 / V1+.

Enjoy Ribbed Gripper Seat Cover — Ventus One

Seat Cover

Ribbed gripper cover for Light Bee / Segway / Ventus stock seats.

OEM Seat

Seat

Out of stock at time of research. Seat height 830mm per V1+ spec.

OEM-Style Replacement Seat — Ventus One

Seat

Stock-style Light Bee seat used on Ventus One platform.

OEM Seat Lower Plate

Seat Hardware

OEM lower seat plate / base support for Ventus One seat assemblies.

RFloXa Hawk31 Pro Front Fork (V1+ OEM Suspension)

Front Fork

RFloXa Hawk31 Pro - the OEM front fork spec on the V1+. Features reinforced inner tubes, progressive spring, and refined damping. Also listed on ventusbikes.us as the FCG31RVP spec in some sources. Verify exact variant/model matching your V1+ build.

RFloXa Fork Seals (V1+ Front Fork)

Fork Seals

OEM fork seals for V1+ RFloXa Hawk31 Pro forks. Seal diameter and specifications not confirmed on listing - compatible with RFloXa 31mm forks.

RFloXa RAB50RC Rear Shock (V1+ OEM Suspension)

Rear Shock

RFloXa RAB50RC - OEM rear shock on V1+. Oil-gas separation design with external nitrogen reservoir for maximum shock absorption and rebound control. Spring rate and travel spec not confirmed on listing.

SKF 37mm Fork Seal Kit (per leg) — Ventus

Fork Seals

Confirm 37mm fork legs on V1/V1+. One kit per leg.

Warp 9 eMoto Shock Cover — Ventus V1

Rear Shock

Neoprene shock cover to shed mud/debris.

Maxima Fork Oil 5WT — Ventus V1

Fork Oil

5WT fork oil for cartridge/USD forks. Confirm viscosity spec.

OEM Headset Bearing and Stem Lock Kit - Ventus One / One+

Headset

OEM headset bearing and stem lock kit for V1 / V1+.

OEM Suspension Triangle Bearing Set - Ventus One / One+

Rear Linkage

OEM suspension triangle bearing set for V1 / V1+.

OEM Swingarm Bearing - Ventus One / One+

Swingarm Bearings

OEM swingarm bearing for V1 / V1+.

Warp 9 Shock Cover — Ventus One

Rear Shock

Shock cover for trail use.

OEM Black Rear Linkage

Rear Linkage

OEM black rear suspension linkage for Ventus One / One+.

Motul MC CARE C3 Off-Road Chain Lube — Ventus

Chain Lubricant

Off-road spray lube for Ventus chains.

Stan's Biobased Wet Chain Lube — Ventus

Chain Lubricant

Wet-condition chain lube alternative.

Maxima Synthetic Chain Lube — Ventus

Chain Lubricant

Maxima Chain Wax — Universal Chain Lubricant

Chain Lubricant

Universal chain lubricant. Works on all chain-drive e-bikes. Wax formula reduces fling and keeps chain cleaner longer.

Maxima Clean-Up Chain Cleaner — Ventus

Chain Cleaner

Chain cleaner before re-lube.

Warp 9 eMoto Tow Rope — Ventus V1

Specialty Tools

Soft tow rope for recovering an e-moto. Universal.

Tusk 15" Curved Tire Iron — Ventus V1

Specialty Tools

Curved tire iron for MX tire changes.

Pro Taper Tie-Down Straps — Ventus V1

Specialty Tools

Soft-loop tie-downs for transporting the bike.

Maxima Waterproof Grease — Ventus V1

Chain Lubricant

Waterproof grease for bearings, pivots, and splines.

Motion Pro Cable Luber — Ventus V1

Specialty Tools

Cable lubrication tool for throttle cables.

Motul MC CARE E2 Moto Wash — 1 Liter Biodegradable Cleaner

Cleaners

Biodegradable spray-on rinse-off cleaner. Safe for plastics, paint, metals. Aerosol restrictions: ships ground only - no air to AK/HI/PR.

Motul MC CARE C4 Factory Line Chain Lube — 9.3 oz

Lubricants

High-speed chain lube for supermoto and performance e-moto. Light tack, minimal fling-off. Aerosol - no air shipping.

OEM Rear Tire — 3.00-18

Rear Tire

Only 2 units in stock at time of research (LOW STOCK). OEM rear tire size 3.00-18 for 18" rear wheel. Tire brand not specified on listing.

OEM Rear Inner Tube — 18" x 3.0

Rear Tube

OEM rear inner tube for 18" x 3.0 rear tire. Valve stem type not confirmed.

Heavy-Duty Front Inner Tube — Ventus V1

Front Tube

Heavy-Duty Rear Inner Tube — Ventus V1

Rear Tube

OEM Front Tire 70/100-19 with Tube (Ventus)

Front Tire

OEM 19" front tire with tube from Pinned Electric (exclusive US Ventus distributor). Stock V1/V1+ front size is 70/100-19.

Tusk Ground Wire Front Tire — 70/100-19

Front Tire

E-moto-specific 70/100-19 front for stock 19" Ventus V1/V1+ wheels. Aggressive knobby designed for Sur-Ron/Talaria-class platforms; same front size as Ventus OEM.

Dunlop Geomax MX34 Front Tire — 70/100-19

Front Tire

Soft/intermediate MX front in OEM Ventus size 70/100-19. Select the 70/100x19 variant on multi-size listings.

Shinko SR241 Trials Front Tire — 2.75-19

Front Tire

Popular dual-sport/trials front for Light Bee-class 19" wheels. CCW tags include Ventus One / One+. Select 2.75x19 variant.

Kenda K785 Millville II Front Tire — 70/100-19

Front Tire

70/100-19 Millville II front. CCW fitment tags include Ventus One / One+ stock 19" front.

Tusk Recon Sticky Front Tire — 70/100-19

Front Tire

Sticky hybrid 70/100-19 front for hardpack/roots. CCW tags include V1/V1P. Select 70/100-19 variant.

Tusk Rim Strip — Ventus V1

Wheel Bearings

Rim strip for tube-type MX wheels. Confirm rim diameter.

Aluminum Valve Stem Caps (Pair) — Ventus V1

Wheel Bearings

Anodized valve caps for tube or tubeless stems.

OEM Front Wheel Spacers

Wheel Hub Spacers

OEM front wheel spacer set for Ventus One / One+ front axle stack.

OEM Rear Wheel Axle - Ventus One / One+

Rear Axle

OEM rear wheel axle for V1 / V1+.

OEM Front Wheel Spacers - Ventus One / One+

Wheel Hub Spacers

OEM front wheel spacers for V1 / V1+.

OEM Rear Wheel Spacers - Ventus One / One+

Wheel Hub Spacers

OEM rear wheel spacers for V1 / V1+.