Arctic Leopard XE

XE Rear Fender — TB Electric

Rear Fender

OEM-style rear fender for Arctic Leopard XE / Vetra Blazer platform.

XF and XE Front Fender (OEM)

Front Fender

OEM front fender for the Arctic Leopard XF and XE. Shared body panel across both models - verify your model is XF or XE (not XE Pro, EXE, or EX, which use different fenders). Front fender is the most commonly cracked panel in tip-overs.

XE Pro Rear Fender (OEM)

Rear Fender

OEM rear fender for the Arctic Leopard XE Pro. Mounts to the subframe - inspect mounting tabs for cracks after hard tip-overs. A cracked tab left unaddressed causes fender vibration that eventually leads to full failure.

XE Pro Skid Plate (OEM)

Skid Plate

OEM skid plate for the Arctic Leopard XE Pro. The XE Pro's motor and battery are exposed underneath - a skid plate is essential for trail riding on anything harder than groomed dirt. Bolt-on OEM fit, no modification required.

XE Pro / Pro S Front Fender

Front Fender

OEM front fender for XE Pro family.

XE Pro / Pro S Rear Fender

Rear Fender

OEM rear fender for XE Pro / Pro S.

XE Pro / Pro S Left Side Fender Cover

Side Panels / Plastics

Left side plastic/fender cover for XE Pro / Pro S.

Replacement Front Fender — TB Electric (Arctic Leopard Fitment)

Front Fender

Universal-style replacement front fender listed for Talaria/Vetra/Arctic Leopard class bikes. Confirm mount points on your model.

XE Pro & Pro S Front/Rear Brake Pads (OEM)

Brake Pads

OEM brake pads for the Arctic Leopard XE Pro and Pro S - compatible with both front and rear calipers. The XE Pro is a heavier, more powerful bike than most e-bikes; check pad thickness every 15-20 riding hours.

Sintered Brake Pads — Pro R / EX Front (OEM)

Brake Pads

OEM sintered metal brake pads for the Arctic Leopard Pro R and EX front caliper. Sintered compound outperforms organic pads under repeated hard braking and in wet conditions - better heat management and longer life in aggressive use.

XE Pro Front Brake Disc (OEM)

Brake Rotor / Disc

OEM front brake rotor for the Arctic Leopard XE Pro. The XE Pro runs a larger-diameter front rotor than the base EX models for improved stopping power at its higher weight. Verify rotor diameter against your current hardware before upgrading.

XE Pro Rear Brake Disc (OEM)

Brake Rotor / Disc

OEM rear brake rotor for the Arctic Leopard XE Pro. Direct replacement for the stock rear disc. The XE Pro's rear brake handles more load given the bike's weight - inspect for scoring and minimum thickness regularly.

XE / XF Right Front Brake Lever (OEM)

Brake Levers

OEM right (front brake) lever for the Arctic Leopard XE and XF. Hydraulic caliper - direct OEM fit. The lever tip is the most vulnerable point in tip-overs. Replace if bent or cracked at the pivot; a bent lever changes brake feel and reduces reach.

XE / XF Left Rear Brake Lever (OEM)

Brake Levers

OEM left (rear brake) lever for the Arctic Leopard XE and XF. Hydraulic caliper, sold separately from the right. Specify the correct side when ordering - left and right levers have different angles and are not interchangeable.

Motul RBF 600 Racing Brake Fluid (DOT 4)

Brake Fluid

Universal maintenance/accessory for Arctic Leopard owners.

Magura Royal Blood Mineral Brake Fluid — Arctic Leopard

Brake Fluid

Universal maintenance/accessory for Arctic Leopard owners.

Mineral Oil Brake Fluid (Light Bee / Ultra Bee / Storm Bee)

Brake Fluid

Universal maintenance/accessory for Arctic Leopard owners.

Maxima Mineral Brake Oil 120ml — Arctic Leopard

Brake Fluid

Mineral oil for hydraulic brake systems. Do not mix with DOT fluid.

OEM Brake Pads — Arctic Leopard XE / XF platform

Brake Pads

OEM-style pads for XE platform calipers; one set typically covers one caliper.

XE Pro / Pro S Brake Pads (OEM-spec)

Brake Pads

OEM-spec pads for XE Pro family. One caliper set.

XE Pro OEM Brake Pads — Electric Cycle Rider

Brake Pads

Factory-spec pads for XE Pro / Pro S. Sold as a set for one caliper.

XE / XE Pro Brake Pads — TB Electric

Brake Pads

TB Electric OEM-style pads for Arctic Leopard XE family / Vetra Blazer platform.

XE / XF OEM Brake Lever — Front & Rear

Brake Levers

OEM-style XE/XF brake lever sold via Charged Cycle Works. Front and rear lever replacement for Arctic Leopard XE/XF controls. Replace bent levers in pairs if the perch is twisted.

Project 9 Upgraded Brake Pads — XE Pro / Vetra Blazer

Brake Pads

Project 9 upgraded brake pads listed for Arctic Leopard XE Pro / Throne SPRNT / Vetra Blazer fitment. Higher-bite pad option versus stock OEM pads. Bed-in on a safe trail before hard braking.

XE Pro Front Brake Assembly (OEM)

Brake Assembly (Complete)

OEM complete front brake assembly for the Arctic Leopard XE Pro. Includes caliper, pads, and hardware. Replace the full assembly only if the caliper is cracked or the bore is beyond servicing - individual pads and rotors handle routine maintenance.

XE Pro Rear Brake Assembly (OEM)

Brake Assembly (Complete)

OEM complete rear brake assembly for the Arctic Leopard XE Pro. If rear braking is weak after pad replacement and proper bleeding, inspect the caliper bore for scoring - a replacement assembly resolves both seal and bore issues.

XE Brake Caliper (OEM)

Brake Caliper

OEM brake caliper for the Arctic Leopard XE. Replace if the piston is seized, the caliper bore is scored, or the bleed port is damaged. For pad replacement, the caliper does not need to be removed - depress the piston with a pad spreader.

TB Front Rotor Guard — Arctic Leopard

Brake Hardware Kit

Front disc guard for 220mm-class rotors. Verify caliper clearance.

XE Pro S Front Brake Hose (OEM)

Brake Line / Hose

OEM front brake hose for Arctic Leopard XE Pro S (and base XE sharing the Pro S brake layout). Replace if the line is kinked, abraded, or leaking at the banjo. Bleed with the correct fluid type after install.

XE Pro S Rear Brake Hose (OEM)

Brake Line / Hose

OEM rear brake hose for Arctic Leopard XE Pro S / base XE. Inspect along the swingarm for rub-through. Always re-bleed the rear circuit after hose replacement.

XE Pro / XF Handlebar Grips (OEM)

Grips

OEM handlebar grips for the Arctic Leopard XE Pro and XF. Standard 22.2mm bar diameter. Consider upgrading to lock-on grips for aggressive riding - stock slip-on grips can rotate under load, especially in wet conditions.

OEM Hand Grip Set

Grips

Universal maintenance/accessory for Arctic Leopard owners.

Odi Ruffian Half-Waffle MX Grips

Grips

Universal maintenance/accessory for Arctic Leopard owners.

Odi Ruffian No-Waffle MX Grips

Grips

Universal maintenance/accessory for Arctic Leopard owners.

Odi Rogue Single-Ply MX Grips

Grips

Universal maintenance/accessory for Arctic Leopard owners.

OEM Right Grip

Grips

Universal maintenance/accessory for Arctic Leopard owners.

OEM Left Grip

Grips

Universal maintenance/accessory for Arctic Leopard owners.

ODI Emig Pro V2 Lock-On Grips — Arctic Leopard

Grips

Lock-on MX grips. Fits standard 22mm bars.

ODI Ruffian Half-Waffle MX Grips — Arctic Leopard

Grips

Soft compound half-waffle grips with reinforced end caps.

ODI Universal Lock-On Half-Waffle Grips — Arctic Leopard

Grips

Universal lock-on half-waffle grips for 7/8" bars.

Renthal Kevlar Dual-Compound Grips — Arctic Leopard

Grips

Renthal dual-compound MX grips. Glue-on.

XE Pro Handlebar (OEM)

Handlebars

OEM handlebar for the Arctic Leopard XE Pro. Full MX-profile bar in the stock bend. Replace if bent in a crash - never straighten a bent aluminum bar. The XE Pro uses a standard 28.6mm Fatbar clamp at center.

XE Pro / Pro R Left Foot Peg (OEM)

Foot Pegs

OEM left foot peg for the Arctic Leopard XE Pro and Pro R. The left peg takes the most abuse in right-side tip-overs. Replace if the mounting pin is bent or the body is cracked - riding with a damaged peg reduces foot grip and control.

XE Pro / Pro R Right Foot Peg (OEM)

Foot Pegs

OEM right foot peg for the Arctic Leopard XE Pro and Pro R. Replace if bent or if the grip pins are worn smooth - worn pins dramatically reduce control in aggressive riding and in muddy conditions.

Tusk Handlebar Grip Glue — Arctic Leopard

Grip Glue

Grip adhesive for non lock-on grip installs.

SE Racing Full-Wrap Handguards — Arctic Leopard

Handguards

Full-wrap aluminum-backbone handguards. Confirm bar clamp diameter.

XE Pro S Kickstand (OEM)

Kickstand

OEM side stand for Arctic Leopard XE Pro S. Pro S specific length/geometry versus the Enduro/Pro R kickstand. Replace bent stands rather than riding with a wobbly prop.

XE Pro 428 Chain (OEM)

Chain

OEM 428-pitch drive chain for the Arctic Leopard XE Pro. Correct pitch and link count for the XE Pro drivetrain. Check tension every 8-10 hours; replace when elongation reaches 0.5% over nominal length to protect sprocket life.

XF 428 Chain (OEM)

Chain

OEM 428-pitch drive chain for the Arctic Leopard XF. Same pitch as the XE Pro. Keep chain well lubricated and replace before visible elongation - a stretched chain rapidly accelerates sprocket wear on both front and rear.

XE Rear Sprocket 48T (OEM)

Rear Sprocket

OEM 48T rear sprocket for the Arctic Leopard XE. The 48T is the stock ratio for the XE model - provides a balance of acceleration and top speed. Going smaller (fewer teeth) adds top speed; going larger adds low-end punch.

XE Pro and XF 58T Sprocket (OEM)

Rear Sprocket

OEM 58T rear sprocket for the Arctic Leopard XE Pro. Higher tooth count than the XE model - matched to the XE Pro's motor output. Replace simultaneously with the drive chain; inspect teeth for hooking or asymmetric wear at each chain change.

XF 58T Sprocket (OEM)

Rear Sprocket

OEM 58T rear sprocket for the Arctic Leopard XF. Same tooth count as the XE Pro sprocket. Inspect teeth for hooking or wear at each chain replacement - replace together when the chain is due for renewal.

XE Pro S/R & XF 428 Master Chain Link (OEM)

Chain

OEM 428 master link for Arctic Leopard XE Pro S/R and XF chains. Keep a spare in the toolkit - a lost clip roadside ends the ride. Confirm clip orientation and rivet/clip style matches your chain before install.

XE Pro S/R / XF 52T Rear Sprocket (OEM)

Rear Sprocket

OEM 52-tooth rear sprocket for XE Pro S, Pro R, and XF. Mid-range gearing option versus the taller/shorter OEM sprockets already cataloged. Inspect teeth for hooking and replace with the chain when wear is visible.

XE Pro S / Pro R / XF Chain Guard (OEM)

Chain Guard

OEM chain guard for Arctic Leopard XE Pro S, Pro R, and XF. Shields the upper run of the 428 chain from roost and keeps the chain line cleaner in mud. Direct bolt-on replacement when the stock guard is cracked or missing.

XE Pro S / Pro R / XF Chain Guide (OEM)

Chain Guard

OEM lower/roller-style chain guide for XE Pro S, Pro R, and XF. Helps keep the 428 chain tracked under load and after jump landings. Replace if the guide block is worn through or the bracket is bent.

XE Pro / XF Throttle (OEM)

Throttle

OEM throttle assembly for the Arctic Leopard XE Pro and XF. Cable-pull type common to both models. If throttle return is sticky, inspect cable routing for kinks first - a misrouted cable is more commonly the cause than a failed throttle body.

XE Pro OEM Hall Throttle — Electric Cycle Rider

Throttle

OEM Hall-effect throttle switch for XE Pro / Pro S / Pro R / XF Pro. Plug-and-play stock harness.

XE Pro S Left Hand Control (OEM)

Switches & Controls

OEM left-hand control cluster for Arctic Leopard XE Pro S. Houses mode/light/horn style switchgear on the left bar. Pro S control - not identical to the Pro R left-hand control listing.

XE Pro S/R / XF Horn (OEM)

Switches & Controls

OEM horn for Arctic Leopard XE Pro S/R and XF. Simple bolt-on replacement when the stock horn is water-failed or cracked. Confirm the switch circuit has 12V accessory power before condemning the horn.

XE / XF / Pro R / EX Charger 10A (OEM)

Charger

OEM 10A charger for the Arctic Leopard XE, XF, Pro R, and EX models. Verify your battery voltage matches the charger output before use - using the wrong voltage charger can damage the battery management system permanently.

XE Pro Display (OEM)

Display / Dashboard

OEM instrument display for the Arctic Leopard XE Pro. Shows speed, battery level, riding mode, and trip data. Replace if the screen cracks or backlight fails - check the CAN bus connector for corrosion before replacing the display itself.

XE Pro / XF Headlight (OEM)

Lighting

OEM headlight assembly for the Arctic Leopard XE Pro and XF. Before replacing the whole unit, inspect the wiring harness connector for corrosion - a poor connection is a common cause of headlight failure that doesn't require a new assembly.

Billet Aluminum Throttle Tube — Arctic Leopard

Throttle

Aftermarket billet throttle tube - confirm grip ID and throttle housing.

XE Pro / Pro S Display

Display / Dashboard

OEM color display unit for XE Pro / Pro S.

Arctic Leopard OEM Charger (XE / XF / Pro R / EX Pro)

Charger

OEM charger covering XE, XF, Pro R, and EX Pro families. Confirm connector for your exact model before install.

XF / XE Brake Sensor (OEM)

Sensors

OEM brake sensor for Arctic Leopard XF and XE platforms.

XE Pro Controller 16.8 kW (OEM)

Controller / ESC

OEM 16.8 kW controller for Arctic Leopard XE Pro. Matches the lower-output XE Pro/Pro S control package versus the Pro R 26.5 kW unit. Confirm model/year connector set before purchase.

XE Battery Discharge Connector Assembly (OEM)

Wiring Harness

OEM battery discharge connector assembly for Arctic Leopard XE Pro. Critical high-current interconnect between pack and controller path. Replace at the first sign of melting, arcing, or loose pin fit.

Motul Fork Oil 5W — Universal Suspension Fluid

Suspension Fluid

Motul 5W fork oil. Universal suspension fluid - use for fork oil changes on any model with conventional forks.

Motul DOT 4 Brake Fluid — Universal (DOT brake systems)

Brake Fluid

Motul DOT 4 brake fluid for bikes with DOT-spec brake systems (NOT for Magura/mineral oil systems). Use on Arctic Leopard EX/EXE/XF/EXT, Storm Bee, and 79Bike Falcon.

Motul Chain Care Kit – Off-Road

Chain Maintenance

Kit includes chain cleaner + lubricant. Suitable for all chain-driven e-motos.

GUTS Racing Hardcore Gripper Seat Cover — XE Pro

Seat Cover

USA-made GUTS ribbed gripper cover for XE Pro / Pro S seat pan. Elastic + Velcro install. Color options on product page.

XE Pro / Pro S Seat

Seat

Complete OEM seat assembly for XE Pro / Pro S.

XE Pro KKE Rear Shock Absorber (OEM)

Rear Shock

OEM KKE rear shock for the Arctic Leopard XE Pro. KKE produces quality suspension components found across the electric dirt bike space. Set sag to 100-110mm (unladen) for MX use. Replace if leaking - oil contamination from a blown seal affects damping linearly.

XE Pro R Front Fork (OEM)

Front Fork

OEM front fork assembly for the Arctic Leopard XE Pro R. The Pro R is the higher-spec variant - fork setup may differ from the standard XE Pro. Verify you have a Pro R before ordering. Inspect seals at each ride for oil weeping.

SKF 37mm Fork Seal Kit (per leg) — Arctic Leopard platform

Fork Seals

Confirm 37mm FastAce-style legs on the specific Arctic Leopard model before order. One kit per leg.

Warp 9 eMoto Shock Cover — Arctic Leopard

Rear Shock

Neoprene shock cover to shed mud/debris.

Maxima Fork Oil 5WT — Arctic Leopard

Fork Oil

5WT fork oil for cartridge/USD forks. Confirm viscosity spec.

XE Pro Swing Arm (OEM)

Swingarm

OEM swingarm for the Arctic Leopard XE Pro. Aluminum construction. Inspect for cracks at the pivot tube and axle plates after hard crashes - a bent swingarm causes persistent handling instability that no suspension tuning can correct. Replace if bent.

Motul MC CARE C3 Off-Road Chain Lube — Arctic Leopard

Chain Lubricant

Off-road chain lube for O-ring and non-O-ring chains.

Maxima Synthetic Chain Lube — Arctic Leopard

Chain Lubricant

Maxima Chain Wax — Universal Chain Lubricant

Chain Lubricant

Universal chain lubricant. Works on all chain-drive e-bikes. Wax formula reduces fling and keeps chain cleaner longer.

Maxima Clean-Up Chain Cleaner — Arctic Leopard

Chain Cleaner

Degreases chain before re-waxing. Safe on O-ring chains.

Warp 9 eMoto Tow Rope — Arctic Leopard

Specialty Tools

Soft tow rope for recovering an e-moto. Universal.

Tusk 15" Curved Tire Iron — Arctic Leopard

Specialty Tools

Curved tire iron for MX tire changes.

Pro Taper Tie-Down Straps — Arctic Leopard

Specialty Tools

Soft-loop tie-downs for transporting the bike.

Maxima Waterproof Grease — Arctic Leopard

Chain Lubricant

Waterproof grease for bearings, pivots, and splines.

Motion Pro Cable Luber — Arctic Leopard

Specialty Tools

Cable lubrication tool for throttle cables.

Motul MC CARE E2 Moto Wash — 1 Liter Biodegradable Cleaner

Cleaners

Biodegradable spray-on rinse-off cleaner. Safe for plastics, paint, metals. Aerosol restrictions: ships ground only - no air to AK/HI/PR.

Motul MC CARE C4 Factory Line Chain Lube — 9.3 oz

Lubricants

High-speed chain lube for supermoto and performance e-moto. Light tack, minimal fling-off. Aerosol - no air shipping.

Heavy-Duty Inner Tube 19" Front — Arctic Leopard XE

Front Tube

19" heavy-duty front tube for XF/XE wheelsets. Confirm valve stem length against OEM rim strip before install.

Heavy-Duty Inner Tube 17" Rear — Arctic Leopard (non-XF)

Rear Tube

17" heavy-duty rear tube for XF/XE. Replace whenever tire is dismounted.

Heavy-Duty Front Inner Tube 100/90-19 — Arctic Leopard (non-XF)

Front Tube

Sized 100/90-19 - not for Arctic Leopard XF (XF uses 17" front / 14" rear). Use XF-specific 70/100-17 and 90/100-14 tubes.

Heavy-Duty Rear Inner Tube 100/90-19 — Arctic Leopard (non-XF)

Rear Tube

Sized 100/90-19 - not for Arctic Leopard XF (XF uses 17" front / 14" rear). Use XF-specific 70/100-17 and 90/100-14 tubes.

XE Pro 21" Front Wheel and Dirt Tire (OEM)

Front Wheel (Complete)

OEM complete 21" front wheel with dirt tire for the Arctic Leopard XE Pro. Full MX sizing - the same 21" wheel used on 125-450cc motocross bikes, giving you a wide aftermarket tire selection. Ready-to-mount complete unit.

XE Pro 18" Rear Wheel (OEM)

Rear Wheel (Complete)

OEM 18" rear wheel for the Arctic Leopard XE Pro. Standard MX rear sizing - same spec as most full-size motocross bikes. Wide tire selection available. Verify hub bearing condition before assuming a complete wheel replacement is needed.

Aluminum Valve Stem Caps (Pair) — Arctic Leopard

Wheel Bearings

Anodized valve caps for tube or tubeless stems.

XF / XE Front Axle Nut (OEM)

Front Axle

OEM front axle nut for Arctic Leopard XE / XF.

XE / Swingarm Rear Axle Nut (OEM)

Rear Axle

OEM rear/swingarm axle nut for Arctic Leopard XE platform bikes. Replace if corners are rounded so proper torque can be applied without damaging the axle.

XE Pro S/R / XF Rear Wheel Bearing (OEM)

Wheel Bearings

OEM rear wheel bearing for Arctic Leopard XF, XE Pro S, and Pro R. Replace when the hub has play or a rough grind. Press square and pack/seal per bearing type.

Guts Racing Seat Cover — Arctic Leopard XE / Vetra Blazer

seat

Guts Racing seat cover for Arctic Leopard XE, EX, and XF. OEM-pattern replacement in durable grip material.

Arctic Leopard XE — OEM Rear Fender

fenders

OEM rear fender for Arctic Leopard XE. Direct bolt-on OEM replacement.

Thrill Seekers Seat Cover — Arctic Leopard XE Pro S

seat

Thrill Seekers aftermarket seat cover specifically for the Arctic Leopard XE Pro S. From CCW.

EBG Foot Brake Kit — Arctic Leopard XE / Vetra Blazer

brake-upgrade

EBike Garage foot brake conversion kit for Arctic Leopard XE. Adds a right-foot rear brake lever in place of the stock hand lever.

EBG Front Moto Brake Conversion Kit — Arctic Leopard XE / Vetra

brake-upgrade

EBike Garage front moto brake conversion kit. Upgrades front brake to motorcycle-spec caliper.

EBG Full Moto Brake Conversion Kit — Arctic Leopard XE / Vetra

brake-upgrade

EBike Garage full moto brake conversion for Arctic Leopard XE. Replaces both stock brake assemblies with motocross-spec hydraulic hardware.

EBG Rear Caliper Moto Brake Conversion — Arctic Leopard XE / Vetra

brake-upgrade

EBike Garage rear caliper moto brake conversion for Arctic Leopard XE. Upgrades the rear brake to a larger motocross caliper and rotor.

Formula EB9 E-Moto Brakes — Arctic Leopard XE / Vetra Blazer

brake-upgrade

Formula EB9 e-moto hydraulic brake set for Arctic Leopard XE. Premium race-grade brakes with stronger lever feel than stock.

Arctic Leopard XE — OEM Brake Pads

brake-pads

OEM brake pads for Arctic Leopard XE. Direct replacement for worn stock pads; fits stock hydraulic calipers.

Project 9 Upgraded Brake Pads — Arctic Leopard XE Pro

brake-pads

Project 9 upgraded brake pads for XE Pro R/S. TBE listing also includes Throne SPRNT and Vetra Blazer compatibility.

Sur-Ron Headlight Adapter — Vetra / Arctic Leopard (All Models)

lighting

Adapter to mount a Sur-Ron headlight on Vetra / Arctic Leopard models. Allows Sur-Ron headlight upgrade for XF, EX, EXE, EXT.

16" Wheel Upgrade — Arctic Leopard XE / Vetra Blazer

wheel-upgrade

16" rear wheel upgrade, converts from stock wheel to 16" for MX configuration. TBE.

16" Wheel Upgrade with Tire — Arctic Leopard XE / Vetra Blazer

wheel-upgrade

16" wheel upgrade kit with tire for Arctic Leopard XE. Converts the stock setup to a 16" wheel for different ride geometry.

21" Front Wheel Upgrade — Arctic Leopard XE / Vetra Blazer

wheel-upgrade

21" front wheel upgrade for Arctic Leopard XE. Larger front wheel improves obstacle clearance and trail-riding feel.

Supermoto Wheelset 17F/16R — Arctic Leopard XE / Vetra Blazer

wheel-upgrade

17" front / 16" rear supermoto wheel set for Arctic Leopard XE. Converts to street/supermoto setup.